The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Need help! (https://67-72chevytrucks.com/vboard/showthread.php?t=50293)

BaggedC10

04-25-2003 03:18 PM

Need help!

What are the factory torque specs. of the body mounts on a C10? Also, does anyone have a picture showing the line-hose-sending unit setup for the passenger tank...??? I'm having trouble getting the lines to sit flat. Thanks in advance! :)

pkbinplano

04-25-2003 07:49 PM

torque specs for Body mount bolts are 2 1/8 grunts ( US )

BaggedC10

05-02-2003 04:43 PM

TTT

I still need the torque specs. for the body mounts. :)

82 Silverado 4X

05-02-2003 05:40 PM

I don't have a chassis assembly manual but using the chart in my book, if they are 1/2-13 thread, you should be safe torquing them to 65-75 ft.lbs.

All times are GMT -4. The time now is 05:59 AM.