69 Original paint fender for cuts
 

I have a fender that I am will to cut sections out of to repair your fender. It has the original GM paint on it. There are some dents and one crease that kept me from using it. I have already sold the cup area to a board member.
I sold him the cup for $30 and It cost me around $14 to ship his part for reference.

Re: 69 Original paint fender for cuts
 

ttt

Re: 69 Original paint fender for cuts
 

I could use the wheel opening to the lower moldeing at the rear,cut about 4inch up from wheel opening.Thanks Randy

Re: 69 Original paint fender for cuts
 

Randy,
I think the rear end of the wheel opening is where the crease is. Take a close look at this pic.
http://67-72chevytrucks.com/vboard/a...1&d=1327548962

Re: 69 Original paint fender for cuts
 

That will be ok,i will be using the front of it more than the back anyway.Just let me know how much & will money order work for you.Thanks Randy

Re: 69 Original paint fender for cuts
 

Randy,
I have circled the area I think you want cut out. Is this what you have in mind? Please see the arrows, there are some dents in the wheel opening. I think they are workable. I just want you to be aware. I can cut it where ever you want and get some more pics if you would like. Just let me know.

Re: 69 Original paint fender for cuts
 

Yes,that will work.Stop at top of the fender molding.You can save that for someone needing to fix the lower part of rear fender,thanks Randy.

Re: 69 Original paint fender for cuts
 

Randy,
Sorry for the delay. I wanted to take a picture for you with the fender before I cut it. I haven't gotten home before dark last two days. I will get it tomorrow shoot it your way and cut it. I hope you weren't in a super hurry. Thanks,
Mike

Re: 69 Original paint fender for cuts
 

That will fine,i'm in no hurry.Hope to hear from you soon & thanks.

Re: 69 Original paint fender for cuts
 

Randy,
This is a picture of what I think you want. I marked it with blue tape.
I can cut it up or down or in any other way you want it. I'm thinking around $20 for the piece and
$15 to ship so $35 total
http://i14.photobucket.com/albums/a3...in/fender4.jpg
http://i14.photobucket.com/albums/a3...sin/fender.jpg
http://i14.photobucket.com/albums/a3...in/fender1.jpg
http://i14.photobucket.com/albums/a3...in/fender2.jpg
http://i14.photobucket.com/albums/a3...in/fender3.jpg

Re: 69 Original paint fender for cuts
 

You can just cut a stright line above the lower molding ,so you can sell the lower half,cut it like you did the front cup.You need to move the tape at the front,i will be needing that part of of the wheel opening.Thanks Randy.

Re: 69 Original paint fender for cuts
 

Let me give it one more shot before I knife it. Here you go Randy, Is this more in line on the fron tape? I will be cutting to the inside of the tape:
http://i14.photobucket.com/albums/a3...n/DBE59CED.jpg
http://i14.photobucket.com/albums/a3...n/411BC3D5.jpg

Re: 69 Original paint fender for cuts
 

How much for the back part of the fender from the body line down?

Re: 69 Original paint fender for cuts
 

James,
The rear section is $20 + $15 for shipping. It does have a shallow crease/dent running paralell with the trim. Only surface rust and the dent should be an easy fix.

Re: 69 Original paint fender for cuts
 

That should do it.Will money order work for you? That's $35.00 total,PM your address & thanks for working with me.Randy

Re: 69 Original paint fender for cuts
 

Hey Mike i PM you, hope you got it.Let me know if you did't, may have push wrong button.Thanks again,Randy.

Re: 69 Original paint fender for cuts
 

I got the pm. I will cut it and get it ready to go. Thanks
Posted via Mobile Device

Re: 69 Original paint fender for cuts
 

Thanks for letting me know Mike, I found a local deal today on 2 front fenders for my 81, so now my truck allowance is gone for the month.

Re: 69 Original paint fender for cuts
 

No problem. Let me know if you need it.

Re: 69 Original paint fender for cuts
 

Here is what is left of the fender.

http://i14.photobucket.com/albums/a3...in/fender5.jpg

http://i14.photobucket.com/albums/a3...in/fender6.jpg

http://i14.photobucket.com/albums/a3...in/fender7.jpg

http://i14.photobucket.com/albums/a3...in/fender8.jpg

http://i14.photobucket.com/albums/a3...in/fender9.jpg

http://i14.photobucket.com/albums/a3...n/fender10.jpg

Re: 69 Original paint fender for cuts
 

Hey Mike ,sent money order out today.Should be there in 3 to 4 days.Thanks again,Randy. :metal:

Re: 69 Original paint fender for cuts
 

Bump for what's left.

Re: 69 Original paint fender for cuts
 

still some good steel left on the rear

Re: 69 Original paint fender for cuts
 

ttt

Re: 69 Original paint fender for cuts
 

i can use that moulding mike, 4sale?