The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   IL 70 cab (https://67-72chevytrucks.com/vboard/showthread.php?t=528510)

CrashEd 06-08-2012 09:43 PM

70 cab
 
70 cab needs rockers but solid floor came from Texas. $300 or best offer
It dose not look like it but its on a trailer this is a really nice cab. ill get better pictures soon
http://67-72chevytrucks.com/gallery/...30354786_n.jpg

WETOWM 06-08-2012 11:30 PM

Re: 70 cab
 
very intrested would like to see pictures top & bottom if possable was this a stick or automatic ?

CrashEd 06-09-2012 01:39 AM

Re: 70 cab
 
It was a auto but my nephew cut it out to put it on a 4x4 so it has the tall tunnel. there is no rust around the window i think all it would need is the rockers inside and out i don't even think it has any rust in the cab corners i know its a solid Texas cab i have some nice doors to if you need them id take $150 for them.It has a Texas title.
My nephew cleaned and under coated the bottom so im sure its solid. it should be a $1000 cab for IL but times are hard.

WETOWM 06-09-2012 08:24 AM

Re: 70 cab
 
Where in illinois are you located ? Put me first in line via some more pictures also was the cab cut correctly for the high hump ? And is the dash cut up at all ?

CrashEd 06-09-2012 10:13 AM

Re: 70 cab
 
My nephew used a small cut off wheel to cut out the floor and the hump fits nice.The dash is not cut that i remember ill check and get more pictures. i live in Pana its about 100 miles from you.
Ed

WETOWM 06-09-2012 10:47 AM

Re: 70 cab
 
Ok thanks

CrashEd 06-09-2012 11:17 AM

Re: 70 cab
 
you still looking for a bed side if so i have a nice set and i have some real nice trim too.
Ed

WETOWM 06-09-2012 01:57 PM

Re: 70 cab
 
i sure am maybe we can make a package deal on the cab & bed sides ?? if you are going to post more pictures of the cab maybe you can also post some of the bed sides ? thanks

CrashEd 06-09-2012 02:38 PM

Re: 70 cab
 
working on getting pictures of both. did you get trim i have a nice full set of uppers and i be leave i have a full set of wood grain bottom trim
Ed

WETOWM 06-09-2012 02:51 PM

Re: 70 cab
 
I am only using lower molding i have a set but would like to look at your also

jamie72 06-09-2012 07:00 PM

Re: 70 cab
 
could you post some more pics of the cab? windshield area and `rust areas`. i might be intereseted if wetowm isn`t.
thanks

CrashEd 06-09-2012 08:06 PM

Re: 70 cab
 
I need to move the cab it has poison oak all over the trailer it sets on

http://67-72chevytrucks.com/gallery/...41038393_n.jpg
http://67-72chevytrucks.com/gallery/...55023596_n.jpg
http://67-72chevytrucks.com/gallery/...17450284_n.jpg
http://67-72chevytrucks.com/gallery/...39864955_n.jpg
http://67-72chevytrucks.com/gallery/...59938198_n.jpg

CrashEd 06-10-2012 12:28 PM

Re: 70 cab
 
cab needs so driver side front pillar work and rockers other than that it looks solid and very fixable
Ed

BHyatt 06-10-2012 05:28 PM

Re: 70 cab
 
Did you say bed sides?

CrashEd 06-10-2012 09:06 PM

Re: 70 cab
 
i have a set

BHyatt 06-11-2012 01:34 AM

Re: 70 cab
 
Pictures?


All times are GMT -4. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com