The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Finally home (https://67-72chevytrucks.com/vboard/showthread.php?t=529291)

spyderman1977 06-13-2012 10:38 PM

Finally home
 
Finally got to bring home my 69 C/20 home. I also got to use my 69 C/10 for what I got it for. The C/10 did well dragging its heavier brother home ;)

The C/20 has a 250 with a granny 4 spd. It has power steering but manual brakes. It does have a factory tach with what I'm guessing is a vacuum guage. It says air pressure? ????

Anyways I do have a complete 3/4 ton front disc brake crossmember out of a 79 truck and what I believe is a 340's something 3/4 ton dana rear. I am debating about going with a 454 and keep the granny low trans. If the rear pans out I should have decent enough gears for some highway use lol.

Let me see if I can get this pic to load from my phone.
Posted via Mobile Device

jocko 06-13-2012 10:43 PM

Re: Finally home
 
We will not speak to you until you post pictures.... So hurry up! :lol:

Congrats, can't wait to see it, sounds like a cool truck!

70cst 06-13-2012 11:03 PM

Re: Finally home
 
Quote:

Originally Posted by jocko (Post 5433436)
We will not speak to you until you post pictures.... So hurry up! :lol:

Congrats, can't wait to see it, sounds like a cool truck!

jocko speaks words of wisdom... :metal: :lol:

dragonwrecker 06-14-2012 01:10 AM

Re: Finally home
 
Quote:

Originally Posted by spyderman1977 (Post 5433428)
Finally got to bring home my 69 C/20 home. I also got to use my 69 C/10 for what I got it for. The C/10 did well dragging its heavier brother home ;)

The C/20 has a 250 with a granny 4 spd. It has power steering but manual brakes. It does have a factory tach with what I'm guessing is a vacuum guage. It says air pressure? ????

Anyways I do have a complete 3/4 ton front disc brake crossmember out of a 79 truck and what I believe is a 340's something 3/4 ton dana rear. I am debating about going with a 454 and keep the granny low trans. If the rear pans out I should have decent enough gears for some highway use lol.

Let me see if I can get this pic to load from my phone.
Posted via Mobile Device

it is not an original gauge for the truck but is is an air pressure gauge.they were found in the c50 and c60 trucks with air brakes

and

:wop:

spyderman1977 06-14-2012 01:27 AM

Re: Finally home
 
Ok lets see if this will work....

http://i2.photobucket.com/albums/y41...613_164358.jpg
http://i2.photobucket.com/albums/y41...613_164423.jpg
Posted via Mobile Device

Just for the record I really do miss my computer :(
So much easier then this phone
Posted via Mobile Device
Posted via Mobile Device


All times are GMT -4. The time now is 12:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com