The 1947 - Present Chevrolet & GMC Truck Message Board Network - Emblem Help

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Emblem Help - Front Fender With 3 Holes (https://67-72chevytrucks.com/vboard/showthread.php?t=533842)

3LakesWI

07-14-2012 07:09 PM

Emblem Help - Front Fender With 3 Holes

1 Attachment(s)

My front fenders on a 1972 Chevy have 3 holes predrilled in each side. I cannot find any emblem that is set up for three holes the two top holes are about 7" apart with another hole aligned about and inch below. I've attached a photo (unfortunately upside down) of the driver's side fender. If I can't find a matching emblem I will have to fill the holes and repaint. Any help is appreciated.

Thanks Jeff

shawno72

07-14-2012 07:12 PM

Re: Emblem Help - Front Fender With 3 Holes

Maybe a GMC custom emblem?

3LakesWI

07-14-2012 07:19 PM

Re: Emblem Help - Front Fender With 3 Holes

I walked Iola swap booths all day yesterday and couldnt find anything with three pegs from that era. The custom emblems seem to be stand alone two-holers.
Posted via Mobile Device

gmc 2500 4x4

07-14-2012 08:43 PM

Re: Emblem Help - Front Fender With 3 Holes

stamping error?

All times are GMT -4. The time now is 11:17 AM.