The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Steering column bottom bearing (https://67-72chevytrucks.com/vboard/showthread.php?t=55114)

mocwon

06-02-2003 09:26 AM

Steering column bottom bearing

I got the tilt column torn down just so I could replace the signal switch. I thought I may as well replace the bottom bearing while I am at it. This is one of the goofiest bearings I have ever seen and it even has an o-ring in the center where the steering shaft comes through. Has anyone found a suitable replacement for this bearing? Thanks

crazy4chevs

06-02-2003 02:01 PM

I need one also!

onelow69

06-02-2003 02:49 PM

I bought my lower bearing from ECE for my tilt about a week ago. It cost around 15 bucks. Just don't break the plastic carrier that the bearing rides in. Good Luck.:bowtie: :bowtie:

All times are GMT -4. The time now is 06:01 AM.