The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Disc brake kit (https://67-72chevytrucks.com/vboard/showthread.php?t=555892)

Rannos 12-11-2012 11:17 PM

Disc brake kit
 
I am trying to gather information on disc brake conversion kits. I want to convert to disc and 5 lug (either 5x4.75 or 5x5) with a 2.5" drop spindle. I haven't had much luck finding a decent kit and was hoping someone here has some information on kits that have been used before.

Captainfab 12-12-2012 12:43 AM

Re: Disc brake kit
 
You don't have to buy a 'kit' to upgrade to disc brakes

http://67-72chevytrucks.com/vboard/s...d.php?t=367260

Rannos 12-12-2012 02:34 PM

Re: Disc brake kit
 
I know I don't need a kit. I know I can use 73-87 brakkes. I want to use a kit. I am morre interested in making sure the process goes smoothly then peicing a few parrts together to save a feww bucks.
Posted via Mobile Device

Indian113 12-12-2012 02:56 PM

Re: Disc brake kit
 
Thanks for posting that link Captain Fab, I'm always trying to save a few bucks and saying yea I did it myself!

LostMy65 12-12-2012 03:58 PM

Re: Disc brake kit
 
Quote:

Originally Posted by Rannos (Post 5754404)
I know I don't need a kit. I know I can use 73-87 brakkes. I want to use a kit. I am morre interested in making sure the process goes smoothly then peicing a few parrts together to save a feww bucks.
Posted via Mobile Device

Actually, what Capt'n is suggesting isn't pieces things together. I see it as the superior route.
Buying a kit and piecing onto the older 63-66 suspension members isn't superior.
Posted via Mobile Device

Rannos 12-13-2012 07:31 AM

Re: Disc brake kit
 
I am looking for a kit with 2 to 2.5 drop spindles. I have the complete front end ouy of an 83 truck but everything would need need replaced or rebuilt and I would need to get the drop spindles anyway so to .me buying the kit is more practical.
Posted via Mobile Device

LostMy65 12-13-2012 08:49 AM

Re: Disc brake kit
 
That makes sense.
Posted via Mobile Device

gimmy 64 12-13-2012 09:12 PM

Re: Disc brake kit
 
early classic is the best. everything yu need is included. they have great customer service and these trucks are the only thing they make parts for. and as far as piecing parts together whats the differance from a worn out 65 truck front end to a 85 worn out front end? you are smart in my opinion to buy a kit.

dracko 12-13-2012 09:39 PM

Re: Disc brake kit
 
Are the parts on the 73-87 front clips that much beefier?

I'm also trying to decide if its worth it to buy a later model clip that will likely need all the parts replaced, as opposed to just replacing the parts on my 64, but adding disc brake spindles, rotors, calipers from a later front end.

LostMy65 12-13-2012 10:08 PM

Re: Disc brake kit
 
Captainfab has said certain parts on the 73-87's are beefier.

I also think things like balljoints and the such are cheaper for the more plentiful 73-87 trucks.

Either way, if one is going to rebuild the front 65 or newer, it's pretty much 6 of one, half dozen of the other.

Sorry, if I derailed the Original poster's thread.
Posted via Mobile Device

groundbound64 12-13-2012 11:09 PM

Re: Disc brake kit
 
Quote:

Originally Posted by Rannos (Post 5753659)
I am trying to gather information on disc brake conversion kits. I want to convert to disc and 5 lug (either 5x4.75 or 5x5) with a 2.5" drop spindle. I haven't had much luck finding a decent kit and was hoping someone here has some information on kits that have been used before.


I'm about to do the same thing on my 64. I think i'm going to go with Brothers Truck. Their deluxe kit comes with

"This is the kit that our customers have been asking about for a long time, and it's here. BROTHERS deluxe "at the wheel" disc brake kit is not only a disc conversion but is also a front end rebuild/upgrade. It fits 1/2 ton trucks only. This kit includes: stock spindles or 2-1/2" drop spindles, upper & lower ball joints, inner & outer tie rods, adjusting sleeves, brake hoses, wheel bearings, seals, bolts, dust caps, calipers, pads, 5 lug rotors (5X5 bolt pattern) and detailed instructions. Kit is also available with 2 1/4" drop spindles. NOTE These do not work on stock rims "

This Kit is $699 but they have 15% off deal (on your entire bill) until Jan 31st .

I'm just not sure which way i'm going.. 5 lug or stay with 6.. Hope this info helps ya..

Jay

Rannos 12-14-2012 12:36 AM

Re: Disc brake kit
 
Wanted to thank everyone for their input. Am thinking I wil go woth Early Classics bit I will chexk out Brothers before hand for sure. I looked at thw cpp kit also but thought for the price it was a little lacking. Anyway thanks again for the onformation guys.
Posted via Mobile Device

gimmy 64 12-14-2012 08:45 PM

Re: Disc brake kit
 
the brothers kit changes everything to later model front end stuff. also it does not include master cilender or brake lines. the ece kit has all of this

LostMy65 12-14-2012 08:50 PM

Re: Disc brake kit
 
Quote:

Originally Posted by gimmy 64 (Post 5758599)
the brothers kit changes everything to later model front end stuff. also it does not include master cilender or brake lines. the ece kit has all of this

That would be the way to go for rebuilding the older model front end.

Rannos 12-18-2012 12:32 AM

Re: Disc brake kit
 
i went with the Early Classic kit. Should be here in a day or two. Will let everyone know how it turns out. Thanks again for everyone's input.

Reyals Bemus 12-18-2012 06:32 AM

Re: Disc brake kit
 
The folks at Early Classic are top notch. Not only is their disk brake conversion kit absolutely first rate (along with everything else they sell), but the guys Mark and Stan will take the time to help you out. They're friendly, knowledgeable, and courteous. Can't ask for more! I call them all the time with random questions and/or to clarify something.

Unfortunately, their shipping costs are high... it hurts especially for me being in Massachusetts.


All times are GMT -4. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com