New here
 

Hello everyone, new member here. I picked up a 1970 C-10 shortbed on New Year's Eve. Loved these trucks for years and actually learned to drive in a 1969 K-10.

Picked up a nice 1970 with a bunch of extra parts. Body is in very good shape, needs cab corners, rockers, and floorboards. Bed is in awesome shape. Engine is a 1968-ish 327, Edelbrock 4bbl, HEi distributor, 3-speed converted to floor shift.

So far I've replaced the intake manifold due to a crack by the water fitting, complete tune up, new (used) power steering pump, and installed a power brake booster.

I have about $5000 in parts on order from LMC and the like. :metal:

Intent is to make this a decent daily driver/Sunday cruiser.

Re: New here
 

Also, if anybody local to South Jersey or close enough to drive here is interested, I have a complete 12-bolt rear end (gearing and condition unknown) with 5-lug hubs for coil spring trucks, and front spindles and brake parts for disk brakes (5 lug also).

Free to a good home, just come and get them. I'm planning to keep my drum brakes for the foreseeable future and have no desire to switch to 5-lugs.

Re: New here
 

Welcome. Sounds like ya got a nice start.
Posted via Mobile Device

Re: New here
 

Welcome!!! You came to the right site! :gmc2:

Re: New here
 

Welcome to the board!
I`d be interested in the 5 lug stuff for a `67 i just bought. i could drive down one night after work if that works for you.

Re: New here
 

Come and get it! Zip is 08061 for planning the drive.

Email me at slattimer@yahoo.com and we can figure it out.

Re: New here
 

Welcome to the boards!
Posted via Mobile Device

Re: New here
 

Welcome to the boards.. You have a nice start with the truck and 5k in stuff coming!

Re: New here
 

Email sent, Thanks.

Re: New here
 

Also welcome from Florida! Nice lookin short fleet.

Re: New here
 

Howwwwwwwwwwwdy! from TX.

Re: New here
 

Welcome from Northern California. That's a good looking truck.

Re: New here
 

Thanks everybody!!


I got about 7 boxes of stuff tonight and a few the other night. I now have all the steel I need for floorboards, front cab mounts, bed floor (minor spot repairs), cab corners, and rockers. the only other thing I need is a right front inner fenderwell. Got the seat reupholstery kit, a bunch of interior stuff, door and window seals etc tonight as well as the new tilt column.

Also stopped and ordered a clutch and flywheel kit for swapping in the 4-speed. Picked up a new starter tonight also. Gonna be a busy week.

I have a big order from early classic and brothers on the way.

Re: New here
 

Sounds like you have a lot of work in front of you but it will be worth every penny when done. Congrates! Welcome to the boad also!;):chevy:

Re: New here
 

welcome ! its going to be sweet!

Re: New here
 

Thanks everybody!

Also forgot to mention that I have the A/C kit from Classic Auto Air coming as well.

Not trying to restore it or build a show truck, but I intend to have a comfortable, reliable, daily drivable truck when I'm done.

I'm going to keep it white and change the interior from blue to black. Junking the nasty buckets the PO put in it and reworking the stock seat. Rhino lining in the bed and probably a black soft tonneau.

Right now I intend to have the everything under the hood good to go this week and start on the floorboards this weekend. Also going to try to repaint the dash and get the tilt column installed. Once I get it registered I'm taking it for an exhaust. The PO put some nasty bent pipes over the axle and welded on a pair of motorcycle mufflers. I'm debating putting the new duals out in front of the tires or behind. Probably in front for the slightly old school look.

I want to have it as a drivable project within a few weeks. It will probably take me over a year to get everything done including paint.

Re: New here
 

Welcome, that looks kinda like a truck my dad used to have, good luck hope its all you hope it will be
Posted via Mobile Device

Re: New here
 

Nice truck welcome.
Posted via Mobile Device

Re: New here
 

Might be interested in your buckets/ or tracks. Post a picture
and price.
Posted via Mobile Device

Re: New here
 

If you sell any of your grill stuff pm me! Thanks and looking forward to
Pictures of the build!
Posted via Mobile Device

Re: New here
 

Hey Lattimer ...

:welcome2: to the forums and :hi: from Ohio. :cong: on your new C10 and I think all 1970 trucks are :c2:

Re: New here
 

Welcome, we look forward to seeing your progress !

Re: New here
 

I have to decide which grille I want to use. Both are pretty decent and need minor dent work, but one is an original 70 and one looks like a later GM replacement----at least based on the 69-70 grille thread I was reading.

Re: New here
 

Can't wait to see the $5000 shipment come in from Lmc. You need to take a picture of all those goodies and show us!
Posted via Mobile Device

Re: New here
 

Didn't you hear?... motorcycle mufflers on these trucks is all the rage!... lol. Can't wait to see how she looks after the parts come in.

Weev-