What headers to use Dropped truck
 

Working on my sons 1969 C10 327 t-400
The truck is lowered and when we pulled the engine it was running full length headers which hang to low. What mid length headers are you using on dropped trucks, other then the 400 sandersons ? Do I have any other choice?
Thanks

Re: What headers to use Dropped truck
 

Here are the ones I purchased. They are made by Sanderson headers.

http://www.earlyclassic.com/catalog....d+upgrade+kits
Posted via Mobile Device

Re: What headers to use Dropped truck
 

Sorry link didn't work. Early Classics sells them. Just look under headers.
Posted via Mobile Device

Re: What headers to use Dropped truck
 

Not sure if there the 400's
Posted via Mobile Device

Re: What headers to use Dropped truck
 

Other than a long tube (which is going to hang beneath the frame a bit) you will need to do shorties get a good exhaust guy to weld up you a nice 3 inch crossover right behind the tranny.
I can drop mine almost all the way down with Hooker Long Tubes

Re: What headers to use Dropped truck
 

Yes I am aware of the sandersons, thought maybe someone else with a dropped truck has used something else.

Re: What headers to use Dropped truck
 

Headman mid length headers for chevelle work awesome I got the part # off this site u can search it then buy tubular motor mount towers to clear them
Posted via Mobile Device

Re: What headers to use Dropped truck
 

Hedman #69010. New ones made specifically for our trucks, $200 from Jegs, fit great on my bagged 69.

Re: What headers to use Dropped truck
 

What heads are you running on the 383?

Re: What headers to use Dropped truck
 

When I had headers...these are what I used....

http://dougthorleyheaders.com/

Re: What headers to use Dropped truck
 

im running GMPP FastBurn heads, finding a header that fits them and the truck is a bit tricky

Re: What headers to use Dropped truck
 

anyone know what will work with a manual trans? i cant find anything to clear the clutch linkage

Re: What headers to use Dropped truck
 

I think mine where camaro shorty headers from headman

Re: What headers to use Dropped truck
 

Mine are 69 camaro shorties from Flowtech. Cheap. $140.

Re: What headers to use Dropped truck
 

I've never run any full length headers that hang below the frame...at least not the straight and lowest part of the frame. Headers for a manual trans are a mystery. I see this asked and never a definitive answer. I've had headers fit with clutch linkage and never gave it a thought,but don't recall exactly what they were. I can say,what you look for is the rear tube on the driver side has to drop straight down if not slightly forward to clear the z-bar. I've had them run directly through (under the z-bar) where the lower arm is. I had to cut the arm off and relocate to one side.

Re: What headers to use Dropped truck
 

These work really well:

http://67-72chevytrucks.com/vboard/s...d.php?t=562386

Re: What headers to use Dropped truck
 

Yep, those are some real nice headers............

Although was hoping for something in the under 200 range. Thanks to those that have responded.

Re: What headers to use Dropped truck
 

do the camaro headers work with a clutch?

Re: What headers to use Dropped truck
 

They're old 441 heads that have been "opened up" a little:lol:

Re: What headers to use Dropped truck
 

No. None of the 3/4 length/car type headers work with manual trans. The run right through that area. You need headers with the rear tube that runs straight down or slightly forward. Anything that angles back will run right into the clutch linkage. They need to drop down,then run under the linkage to work