stubborn lca & balljoint
 

iv been beating at these lower balljoints for a good hour and havent budged them, the last ones came off with no problems

any advise? iv used a air hammer/chizzle, BAH and the press at work and can make them move

Re: stubborn lca & balljoint
 

Clean it up really good and check to see if someone tack welded them in.I've seen it done when the BJ didn't fit tight in the CA,

Re: stubborn lca & balljoint
 

I remember mine were a pain to get out as well. I think I used a mini sledge and beat the you know what out of them. Place some 2x4 pices of wood under it to get it off the floor then try it.

Re: stubborn lca & balljoint
 

ok problem solved lol
this thing was driving me crazy.
i smacked the spindle around the balljoint and loosened it up
screwed the nut back on and made it flush with the threads
and smacked the hell out of it