![]() |
1959 spartan 80 frame swap
ok is there somebody that already swap a frame of a 1991-2000 GMC 3500 HD under a 1955-1959 cab ?
this is my truck http://i1138.photobucket.com/albums/...once/002-4.jpg and its on that type of frame that I what to use http://i801.photobucket.com/albums/y...cLkcw48_20.jpg |
Re: 1959 spartan 80 frame swap
did you measure the width? if it will fit I think it would be a cool swap!
|
Re: 1959 spartan 80 frame swap
X2 for a cool swap, still have the old cab, and a frame that you could do serious work with
Posted via Mobile Device |
Re: 1959 spartan 80 frame swap
Quote:
|
Re: 1959 spartan 80 frame swap
The 1959 spartan 80 the front track is 71.25 inch's
and a friend told me that the 1995 3500 HD is about 70.50 but I want to measure everything else to make sure that it will fit next week I will go measure it in the scrap yard |
Re: 1959 spartan 80 frame swap
I'll be following this thread. Definitely wanna see that swap. Sub'd! ;)
|
Re: 1959 spartan 80 frame swap
This will be an interesting and cool project.
Keep us up to date on your findings and post lots of pics! |
Re: 1959 spartan 80 frame swap
i would just put a flatbed on it and rock it!
|
Re: 1959 spartan 80 frame swap
Quote:
|
Re: 1959 spartan 80 frame swap
Quote:
|
Re: 1959 spartan 80 frame swap
Did this ever get off the ground...its an interesting idea
Posted via Mobile Device |
Re: 1959 spartan 80 frame swap
i just bought last week a 1999 3500 HD
so in couple week i will start the project |
Re: 1959 spartan 80 frame swap
1 Attachment(s)
Cool to finally see another Spartan around! I have a Spartan 100.
|
Re: 1959 spartan 80 frame swap
Didn't know there was a 100, thought c90 was the largest
|
Re: 1959 spartan 80 frame swap
I had a 10400 series truck at one point. It was a 59. Factory 348 5 speed/ 2 speed.
|
Re: 1959 spartan 80 frame swap
Finaly have the 3500 HD frame at home
This week will removed the cab from the 1959 frame ;) http://i801.photobucket.com/albums/y...team/002-1.jpg |
Re: 1959 spartan 80 frame swap
The 1959 Frame finally remove from the cab . This week the 1997 3500 HD frame will be Under the 1959 Cab :metal:
http://i1138.photobucket.com/albums/...e/P1020023.jpg |
Re: 1959 spartan 80 frame swap
Any updates?
|
Re: 1959 spartan 80 frame swap
I'da done it the other way.............put the newer axles under the original Sparton .
What do you expect to use the truck for ? Canadian model numbers on GMCs are inverted compared with US models. I have a few Canadian GMC brochures.........and pictures . And then there was "Maple Leaf" ! |
Re: 1959 spartan 80 frame swap
4 Attachment(s)
Here is mine. Its a 1958 60 Viking on a 1998 chevy 3500 chassis. Not an HD though. I could not find an HD that fit my pricerange and criteria.
Not hijacking, I will be doing a build thread here in a few weeks. Just posting a few pics for the reference. |
Re: 1959 spartan 80 frame swap
Quote:
|
Re: 1959 spartan 80 frame swap
Nice truck warrior 9 and its look pretty low . is your cab close to your frame ?
|
Re: 1959 spartan 80 frame swap
ok i started to work back on my truck the new frame is Under the cab ready to do the cab mounts , im happy of the look of it , not that much to do , need to cut the firewall for valve cover and the lower of the grill that i remove about 2 inch , to have it as low as possible .
http://i1138.photobucket.com/albums/...once/003-4.jpg http://i1138.photobucket.com/albums/...nce/0012-1.jpg http://i1138.photobucket.com/albums/...once/030-1.jpg http://i1138.photobucket.com/albums/...nnonce/022.jpg http://i1138.photobucket.com/albums/...nonce/0102.jpg http://i1138.photobucket.com/albums/...nonce/0042.jpg |
Re: 1959 spartan 80 frame swap
looking good
|
Re: 1959 spartan 80 frame swap
Looks nice!!!! One question. Could you move the engine crossmember up about 3 inches? Might move the engine just enough so you wouldn't have to cut the cab or valve covers.
|
All times are GMT -4. The time now is 11:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com