The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Quciky rally wheel question/bolt pattern (https://67-72chevytrucks.com/vboard/showthread.php?t=588382)

CGerow 07-12-2013 03:28 PM

Quciky rally wheel question/bolt pattern
 
So I am looking at buying a set of Vette/Chevelle Rally wheels for my 71 Cheyenne. I am pretty confidant that they will fit. I am told the rally's are a
5 on 4-3/4. Can anyone confirm that is what the original bolt pattern dimensions are on my 71? I have seen tons of these wheels in pics on various rides in this forum, so I ass/u/me the will fit LOL.
and as far as price goes, he is looking at $600 with Eagle GT's . 2-15x8 and 2-15x7. That seems reasonable?:chevy:

hayhauler71 07-12-2013 03:38 PM

Re: Quciky rally wheel question/bolt pattern
 
sock bolt pattern for a 71 c 10 is 5 on 5

CGerow 07-12-2013 04:09 PM

Re: Quciky rally wheel question/bolt pattern
 
I have been told by the guy selling them he "thinks" they are 4-3/4", but I did a little searching and it seems as though the Chevelles and Corvettes of that era are 5 on 5 as well? Which is a good thing, then they would fit.....problem for me is they are a 3 hour drive to find out.....

towbar 07-12-2013 04:16 PM

Re: Quciky rally wheel question/bolt pattern
 
71 up 1/2 ton 2wd GM trucks are 5 on 5 pattern. Camaros, Chevelle, Novas, Corvette of that era are 5 on 4.75 pattern. Factory GM Corvette style ralley wheels "will not" fit your truck. There are aftermarket companies (vintage wheel pops in mind) that make Corvette style wheels that do fit your truck.

CGerow 07-12-2013 04:19 PM

Re: Quciky rally wheel question/bolt pattern
 
Thank you for clearing that up, as dissapointed as I am....

cdowns 07-12-2013 07:08 PM

Re: Quciky rally wheel question/bolt pattern
 
around here if u lwait and look for the truck ralley wheels either 5 or 6 lugs they can b had for less than $100 for a set of 4 with trim rings an center caps

elf w/capital T 07-12-2013 07:31 PM

Re: Quciky rally wheel question/bolt pattern
 
I have the same vette/velle rallies on all four, 5-4-3/4. Yup good for me, ha, but its a stock 68 upfront and impalla rear....honestly i dont know nor think that the 71 72 have the same bolt pattern. Sometimeshorty if they havent posted, they will tell you for sure.....

cdowns 07-12-2013 07:34 PM

Re: Quciky rally wheel question/bolt pattern
 
Quote:

Originally Posted by elf w/capital T (Post 6169963)
I have the same vette/velle rallies on all four, 5-4-3/4. Yup good for me, ha, but its a stock 68 upfront and impalla rear....honestly i dont know nor think that the 71 72 have the same bolt pattern. Sometimeshorty if they havent posted, they will tell you for sure.....

68 dont have 5lugs stock from the factory they came with 6lug bolt patterns

72bowtiestepper 07-13-2013 01:46 AM

Re: Quciky rally wheel question/bolt pattern
 
Truck style rally wheels for 2wd c-10's are definetely 5 on 5.
Camaro, chevelle, corvette rallys are 5 on 4 3/4.


All times are GMT -4. The time now is 11:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com