? bout cpp hubs
 

I'm in the process of ordering rims hopefully this week just would like to confirm some measurments. I seen these (bore at 3 3/16, 3 inches to end of dust cap) awhile back but are a little diff then the measurments i have taken on the CPP 13" big brake kit i have, 3 1/16 th on the bore and 2 3/4 from rotor to end of dust cap. I am also going to have to replace the wheel studs that stick out 1" i dont think these will be enough for the billet specialties MAG rims im wanting. Just for reference 67 short fleet with the narrow housing and am ordering 20x8.5 w 5.25 bs and 255/40/20 also 20x10 w 4.75 bs and 295/40/20 proxes. Any help will be helpfull, it's alot of cash for a poor boy like me also has a 4/6 static drop with porterbuilt arms moser rear axles Thanks Guys

Re: ? bout cpp hubs
 

Don't have much for you but sounds like it'll be pretty dang nice
Posted via Mobile Device

Re: ? bout cpp hubs
 

With my billet specialties I ordered the vintecs in a 20x8 with a 4.5 bs. The big brake kits come with the modular drop spindles so make sake sure you account for those. Best thing you can do is physically measure
Posted via Mobile Device

Re: ? bout cpp hubs
 

3.06 (3 1/16")is the correct snout diameter, length sounds about right too.

Re: ? bout cpp hubs
 

tony58 thanks for confirming the snout measurment and 67ctener sounds like we have similar ideas for our builds did you also replace your wheel studs for the billet specialties

Re: ? bout cpp hubs
 

I have no problem with mine front or rear.
Posted via Mobile Device

Re: ? bout cpp hubs
 

If it's ever on the road I'll let you know if any fall off haha
Posted via Mobile Device

Re: ? bout cpp hubs
 

Well i been messin with mine for years. At this point i would just like to drive it befor i die lol. I need to order alot of parts but I'm having trouble giving out the old credit card num. My neighbor is always telling me it easy just sign your name. I guess he's right all you need is $

Re: ? bout cpp hubs
 

Haha yup just that easy. Mines my baby, the reason why I go to work everyday
Posted via Mobile Device

Re: ? bout cpp hubs
 

How do the moduler spindles affect ordering rims

Re: ? bout cpp hubs
 

Any resolution to getting longer studs for the billet wheels?