New B from WI with a 68 C10 LB "beater"
 

Been Lurking for a few months now after picking up a C10 few months ago fig I would drop a line and show my pile.
From Kenosha Wi

Truck was seating outside in a back yard since 1990ish?
Day I got it
http://img.photobucket.com/albums/v1...s5d958a7e.jpeg

Home playing with it after getting it running.
http://img.photobucket.com/albums/v1...s71a36bbf.jpeg

Re: New B from WI with a 68 C10 LB "beater"
 

Bagging it
http://img.photobucket.com/albums/v1...s3a2162c0.jpeg

This photo is Notched rear and no springs in the front Rear sway bar is holding up rear from dropping down...Front is 100% stock will go about 1" lower without front sway bar.
http://img.photobucket.com/albums/v1...se6086f8a.jpeg

http://img.photobucket.com/albums/v1...sb75da7b6.jpeg

Bags on from 2.5 drop spindles ride tech arms
http://img.photobucket.com/albums/v1...s6a372141.jpeg

http://img.photobucket.com/albums/v1...sbf7f3dc6.jpeg
http://img.photobucket.com/albums/v1...ps347d161c.jpg

Re: New B from WI with a 68 C10 LB "beater"
 

Nice job, dig it out of the back yard, hook a trailer to it, and put it to work. Any specific plans for the truck?

Re: New B from WI with a 68 C10 LB "beater"
 

Thanks. Goal is and was bag it disc brakes & drive it maybe do a LS base 5.3L junk yard swap...as far as look its almost there now just have to get bed and bags fitted up. Solid driver that looks like a beater is end game. Also picked up some big white walls