The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NC Few odds and ends (https://67-72chevytrucks.com/vboard/showthread.php?t=599926)

Bhelton 10-10-2013 06:30 PM

Few odds and ends
 
1 Attachment(s)
(1) stainless steel brake line kit for 71-72 swb, missing 2 lines for rear axle $140 shipped
(2) 67 radiator support mount kit $15 shippedSold
(3) wells regulator, new $15 shipped
(4) Lokar 3 speed shift knob for th400 or th350, new just bought a black one to replace it $25 shippedSold
(5) disc brake conversion master cylinder new $55 shipped
(6) lokar shift boot new $25 shipped Sold
(7) 72 fleet side gate handle and rods $30 shippedsold
(8) 8 new Asco 3/8" valves with mounting brackets and fittings including mufflers. $325 shipped for all
(9) GMC Paul's upper spring retainers powder coated $20 shipped mounted coils but never drove
May add more to this later

Bhelton 10-10-2013 06:32 PM

Re: Few odds and ends
 
1 Attachment(s)
Pic2

Bhelton 10-10-2013 06:34 PM

Re: Few odds and ends
 
1 Attachment(s)
Regulator

Bhelton 10-10-2013 06:36 PM

Re: Few odds and ends
 
1 Attachment(s)
lokar knob

Bhelton 10-10-2013 07:14 PM

Re: Few odds and ends
 
1 Attachment(s)
Master cylinder

Bhelton 10-10-2013 07:20 PM

Re: Few odds and ends
 
1 Attachment(s)
Lokar shift boot

ecgate 10-10-2013 09:40 PM

Re: Few odds and ends
 
Is the ring on the lokar shifter boot polished stainless steel or is it black. It looks black in the pic is why im asking. Ill take it if it has the polished stainless steel ring.

Bhelton 10-10-2013 09:53 PM

Re: Few odds and ends
 
Quote:

Originally Posted by ecgate (Post 6309174)
Is the ring on the lokar shifter boot polished stainless steel or is it black. It looks black in the pic is why im asking. Ill take it if it has the polished stainless steel ring.

It's stainless

ecgate 10-10-2013 09:55 PM

Re: Few odds and ends
 
Quote:

Originally Posted by Bhelton (Post 6309202)
It's stainless

Ill take the lokar shift boot. Ill PM you my shipping address. Can you PM me your payment info. Thanks

Bhelton 10-10-2013 10:04 PM

Re: Few odds and ends
 
Quote:

Originally Posted by ecgate (Post 6309206)
Ill take the lokar shift boot. Ill PM you my shipping address. Can you PM me your payment info. Thanks

Pm on its way

Bhelton 10-11-2013 07:46 PM

Re: Few odds and ends
 
1 Attachment(s)
Adding a Lokar BL-1400u, never wired it up. Bought last week for my floor shifter to wire up reverse lights and ended up going Dakota digital. Paid $38 sell for $35 shipped

Bhelton 10-12-2013 10:04 AM

Re: Few odds and ends
 
Shifter boot sold to ecgate

Bhelton 10-15-2013 01:01 PM

Re: Few odds and ends
 
Bump

Bhelton 10-21-2013 08:29 AM

Re: Few odds and ends
 
Make offers, need these parts out

ScottH 10-21-2013 09:49 AM

Re: Few odds and ends
 
Can u do $25 shipped on the Lokar BL-1400u? (summit sells them for $28)

Bhelton 10-21-2013 09:55 AM

Re: Few odds and ends
 
Quote:

Originally Posted by ScottH (Post 6325654)
Can u do $25 shipped on the Lokar BL-1400u? (summit sells them for $28)

I'll do that

elf w/capital T 10-21-2013 08:02 PM

Re: Few odds and ends
 
Pm sent on brake lines!!

Bhelton 10-21-2013 08:47 PM

Re: Few odds and ends
 
Pm returned

Bhelton 11-02-2013 10:06 AM

Re: Few odds and ends
 
Still have the following.

Stainless brake lines
Lokar knob
Lokar neutral safety switch/back up switch
Voltage regulator
Grant horn button with bow tie logo $20 shipped
8 3/8" Asco valves
New disc brake master cylinder

You can pm me or text me at 828-217-7724

Bhelton 11-10-2013 12:45 PM

Re: Few odds and ends
 
$100 shipped for brake lines

tjmeadows 11-10-2013 06:07 PM

Re: Few odds and ends
 
$30 master cylinder?

shovel55 11-10-2013 06:10 PM

Re: Few odds and ends
 
will these lines fit on a 68 shortbed

Bhelton 11-10-2013 06:55 PM

Re: Few odds and ends
 
Quote:

Originally Posted by shovel55 (Post 6357006)
will these lines fit on a 68 shortbed

i had a set just like this on a 67 so i dont see why they wouldn't. these run from master cylinder to the outside of frame and you need disc brake front

shovel55 11-10-2013 07:57 PM

Re: Few odds and ends
 
I do have front disc what all is there and what else will I need as I do not think there are much on my truck.I just got it and have not checked it all out yet

Bhelton 11-10-2013 10:35 PM

Re: Few odds and ends
 
Quote:

Originally Posted by tjmeadows (Post 6357001)
$30 master cylinder?

I'll do $40 shipped


All times are GMT -4. The time now is 06:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com