How Do You Prep Inside Frame Holes
 

TEAM:

I have prepped the front end of my frame for primer, but do not feel the edges of all the holes in the frame are paint ready.
Attachment 1188310
How do you normally address these holes in preparation?

Should I just roll some sand paper and use a finger?

Mahalo!

Re: How Do You Prep Inside Frame Holes
 

te smaller ones you mite run a correct size drill bit thru first. they make small flapper wheels for your drill too. or glue a piece of sand paper to a wood dowel. just some ideas.

Re: How Do You Prep Inside Frame Holes
 

Good idea on the drill bits, I will just be careful to not elongate. Was trying to find cone shaped wire wheels, but couldn't find something like that for the holes.

Anyone ever see something cone shape for wire wheels?

Re: How Do You Prep Inside Frame Holes
 

If you have a dremel tool, this little 1/2" brush might be a solution:
http://www.amazon.com/Dremel-442-Carbon-Steel-Brus...

Re: How Do You Prep Inside Frame Holes
 

A wire battery post & terminal cleaner tool works good too....

http://www.harborfreight.com/media/c...mage_14907.jpg

Re: How Do You Prep Inside Frame Holes
 

Dremel is another tool on my list to buy soon haha.

Great idea. Have one laying around, just didn't event think about it.

Re: How Do You Prep Inside Frame Holes
 

Any welding supply house will have coned wirewheels

Re: How Do You Prep Inside Frame Holes
 

Unfamiliar with welding supply houses. What are some names of such suppliers? If there are nation wide options.

Re: How Do You Prep Inside Frame Holes
 

Welding supply online stores..................... way too easy to spend 'fat stacks' on welding equipment.

Ask me how I know............... :uhmk:

cheers
JohnG