The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Bed Removal Question (https://67-72chevytrucks.com/vboard/showthread.php?t=609913)

ekgguy

12-30-2013 05:16 PM

Bed Removal Question

I am getting ready to take my old bed off and put the replacement on. I have unplugged the wiring from the connector on the frame.

Is there a trick to getting all the wiring through that little grommet in the bed?

hugger6933

12-30-2013 09:38 PM

Re: Bed Removal Question

No tricks there if it is giving you problems give it a squirt of wd-40 or similar to lube it up and help it along. We do it all the time in the shop on things like door stoppers and gas lids, hood bumpers and stuff like that. It will help it move easier than you thought possible. Jim

JimKshortstep4x4

12-31-2013 04:32 PM

Re: Bed Removal Question

The grommets are split so you can take the grommet off before removing the wire.

Jim

Mr Chevorlet

01-01-2014 12:08 AM

Re: Bed Removal Question

There is a grove around the rubber and it pops In the hole on the frame.

ekgguy

01-04-2014 07:59 PM

Re: Bed Removal Question

Quote:

Originally Posted by hugger6933 (Post 6442408)

Worked perfect. Thanks.

All times are GMT -4. The time now is 07:33 AM.