![]() |
Leftovers from my project sellout
5 Attachment(s)
ok guys as some of you know I sold out last week, this is an updated parts list with updated prices:
still have all the biggest stuff, and it is all pickup only 72 A/C cab with title, good doors, will need rockers and corners, inner cowl sheet metal, radio has not been cut.$400 I have the inner cowl sheet metal needed for the cab NIB, $200 Both front fenders, have been blasted and etch primered, left is perfect, right will need cup which I am including in the sale, $150 each or $250 for pair Long bed, solid bed floor because it had a camper on it, rear lower quarters have been dented in but have sheet metal to fix it which I am including, other than that bed is really good, tailgate included $300 Factory A/C parts from engine bay, unknown condition $100 Custom Gauge cluster with brand new autometer ultralite gauges, incomplete, 5" 10k tach, 5" 200mph speedo, 2 5/8" volt, 2 5/8" oil pressure, 2 green/1 red led lights for signal indicators and high beam, have all factory boxes, over $500 in gauges alone, $350 shipped also have driver quality 72 grill with good insert, hood, cowl, usuable core support, and a few good radiators, just ask on prices all prices are negotiable |
Re: Leftovers from my project sellout
I'm interested in the tailgate ?
|
Re: Leftovers from my project sellout
Quote:
|
Re: Leftovers from my project sellout
Put me 1st in line for the tailgate and post a pic when you have time ,Thanks
|
Re: Leftovers from my project sellout
What is the part number on the inner cowl panel? And where did you buy it from?
|
Re: Leftovers from my project sellout
Will check on inner cowl number, it came from southern Kentucky classic and cost 230
|
Re: Leftovers from my project sellout
Pm sent on cowl
|
Re: Leftovers from my project sellout
Quote:
|
Re: Leftovers from my project sellout
5 Attachment(s)
pictures
|
Re: Leftovers from my project sellout
1 Attachment(s)
another tail gate pic, no rusted out places only small dent above "c" in chevrolet
|
Re: Leftovers from my project sellout
What would you take for the grill?
|
Re: Leftovers from my project sellout
$125 pick up only
|
Re: Leftovers from my project sellout
I 'll do 100.00 for tailgate if it comes available ...
|
Re: Leftovers from my project sellout
Grumpy is on the clock for tailgate, he has til 7:00 pm to respond, if i dont receive a response by then rkin it is yours
|
Re: Leftovers from my project sellout
Is there any rust through or bondo on either of the doors? How is the roof and windshield area on the cab.
Thank you , Mike |
Re: Leftovers from my project sellout
Doors are good! Passenger has a dent but could be popped out but i have the new door skin for replacement if not, everything is good but inner cowl, rockers, corners and the extreme outside of floor pans. Drip rail is good.
|
Re: Leftovers from my project sellout
Also i have new inner cowl if you're interested
|
Re: Leftovers from my project sellout
I'm interested in driver and pas doors, complete with glass and all. What do you need for both doors?
|
Re: Leftovers from my project sellout
$300 with new skin included picked up if i separated them from cab
|
Re: Leftovers from my project sellout
Just to be clear guys, first money gets anything i have, if you haven't comitted to buy part or all of something, i will sale to first money in hand
|
Re: Leftovers from my project sellout
how much for cab without doors? also how much for brake booster with mounts?
|
Re: Leftovers from my project sellout
Quote:
|
Re: Leftovers from my project sellout
I think i am pricing fairly, if something seems high let me know
|
Re: Leftovers from my project sellout
Going to have to pass on Grille
Thanks for the pics |
Re: Leftovers from my project sellout
Tailgate sold to rkintn
|
All times are GMT -4. The time now is 08:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com