![]() |
is this a 46 shortbed frame? i need pics or specs to verify
4 Attachment(s)
found this frame suppose to be 46 chevy shortbed, can anyone confirm what it is? heres pics and measurements if anyone knows what i got.
total length 173 3/4" total diagonal length 176 3/4" its square front side to side (minus horns) 24 7/8" front at 1.5" holes 25 7/8" center of rear wheel opening 43 1/2" at rear crossmember 46 1/8" rear 46 1/4" i read front is suppose to be 25 5/8" and rear 44 1/4" front to center of hanger 35 1/4", rear crossmember to hanger 52 1/4" there are no spring hangers on this frame |
Re: is this a 46 shortbed frame? i need pics or specs to verify
Not sure but to me something looks a little different than mine. I had a different trans cross member. Here's a pic of my 46.
http://i42.photobucket.com/albums/e3...psc399552f.jpg here's a pic of the my 46 frame after I stripped out the Pacer front end the PO boggered into it. http://i42.photobucket.com/albums/e3...7/IMG_0642.jpg |
Re: is this a 46 shortbed frame? i need pics or specs to verify
looks like a late 47 and up advance design frame.
|
Re: is this a 46 shortbed frame? i need pics or specs to verify
only good pics i found were on ebay and my frame does seem to be the 47-53 a/d design. im going to do some measuring and see what it will take to use with my 41 cab. i have not found any info about putting the art deco truck on the advance design frame.
|
Re: is this a 46 shortbed frame? i need pics or specs to verify
after measuring it looks like everything will bolt to the frame except the rear body mount (frame is 1" too wide). wheelbase is within an inch so thats good.
im going to get the interior mocked up and a front ifs ready before i set the tub and front on the frame. so it will be a while |
Re: is this a 46 shortbed frame? i need pics or specs to verify
I did a 45 body on a 52 1 1/2 ton frame the only big issue i had was making bumper brackets. The frame was a little wider at front, a 1/2ton frame may not be a problem or if your not going to have a stock bumper.
|
All times are GMT -4. The time now is 10:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com