The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NC Wtb ps fender cup (https://67-72chevytrucks.com/vboard/showthread.php?t=625357)

towbar 04-16-2014 09:58 PM

Wtb ps fender cup
 
Hoping someone has a PS fender that they would be willing to cut up, of course I'm needing the front cup.....some rust is OK if its repairable but would like the best one I can get.....wanting from about 2 inches above the body line down. Let me know what you have?

Thanks!

Rochlow 04-16-2014 11:18 PM

Re: Wtb ps fender cup
 
http://www.classicheartbeat.com/Patch%20Panels.htm

billsbowtie 04-16-2014 11:28 PM

Re: Wtb ps fender cup
 
i think i have 1 i will check thursday $35.00 shipped.

towbar 04-17-2014 09:48 AM

Re: Wtb ps fender cup
 
Quote:

Originally Posted by Rochlow (Post 6632745)

Thanks Rochlow, I bought one of these, and it was not even close to fitting, contour were different. Would need to section and reshape to make it fit correctly so i thought if I could get an original and just fix a small spot or two, I would be time ahead.

towbar 04-17-2014 09:49 AM

Re: Wtb ps fender cup
 
Quote:

Originally Posted by billsbowtie (Post 6632766)
i think i have 1 i will check thursday $35.00 shipped.

sounds good, if you could post a pic that would be great!

Rochlow 04-17-2014 10:08 AM

Re: Wtb ps fender cup
 
Quote:

Originally Posted by towbar (Post 6633196)
Thanks Rochlow, I bought one of these, and it was not even close to fitting, contour were different. Would need to section and reshape to make it fit correctly so i thought if I could get an original and just fix a small spot or two, I would be time ahead.

That's good info to know. I was going to order one of these to repair one of my fenders.

towbar 04-17-2014 03:30 PM

Re: Wtb ps fender cup
 
Quote:

Originally Posted by Rochlow (Post 6633222)
That's good info to know. I was going to order one of these to repair one of my fenders.

There may be more than one manufacturer? dont know?? But my experience with the aftermarket cup I have is that it would have took more sculpting and reshaping than I wanted to do to make it fit correctly and look right. I feel I would have a better shot at using a OEM cup and grafting it on.

billsbowtie 04-17-2014 08:03 PM

Re: Wtb ps fender cup
 
http://i781.photobucket.com/albums/y...ps4b90ad4b.jpg
http://i781.photobucket.com/albums/y...ps4656fe9b.jpg
http://i781.photobucket.com/albums/y...ps6f3e2b05.jpg
http://i781.photobucket.com/albums/y...ps419f2c46.jpg
towbar cup only has surface rust inside no holes yet.
i also have rear lower patch has small dent where blue x is may push out easy same price & i have a drivers side lower rear patch same price.
pic 4 is whats left of fender if you or anyone else needs a patch off of it let me know. it has small dents where blue is.

towbar 04-17-2014 08:17 PM

Re: Wtb ps fender cup
 
looks good, how much for both PS pieces??

billsbowtie 04-17-2014 08:59 PM

Re: Wtb ps fender cup
 
how about $60.00 shipped for both.

towbar 04-17-2014 09:20 PM

Re: Wtb ps fender cup
 
sounds good to me, let me know your payment preference and I'll get you some cash.

towbar 04-17-2014 10:12 PM

Re: Wtb ps fender cup
 
Hey Bill, payment sent via paypal

thanks a bunch.


All times are GMT -4. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com