The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NC A/C vents (https://67-72chevytrucks.com/vboard/showthread.php?t=629251)

NC67Chev 05-18-2014 08:00 AM

A/C vents
 
2 Attachment(s)
I assembled this stuff to install A/C, but I changed my mind. I'm putting it in 2 groups.

Group 1: $30 plus shipping
Attachment 1255068
New reproduction center vent from Old Air - Very nice quality!
Original center - The driver side connector was cracked, so I cut the damaged part off and plugged it. There's no other damage.
Original studs - Cleaned & painted black.
One original nut
New vent gasket

Group 2: $30 plus shipping
Attachment 1255069
Blue side vent pods - Very nice condition! No broken clips. They matched my dash pad.
Extra set of vent balls and hose adapters
Original long screws
Bottom scews, but unsure if original.

Kennuck 05-19-2014 04:02 PM

Re: A/C vents
 
Interested in Group 2 how much to ship to 48060
Thanks

NC67Chev 05-19-2014 06:33 PM

Re: A/C vents
 
Quote:

Originally Posted by Kennuck (Post 6680179)
Interested in Group 2 how much to ship to 48060
Thanks

How about $35 shipped? I'm sure it will be more than that, but I'll cover the balance.

Kennuck 05-19-2014 07:37 PM

Re: A/C vents
 
I will take group 2 Paypal ok? Please pm payment info.

I would take both groups for 65 shipped if that works for you?

NC67Chev 05-19-2014 08:30 PM

Re: A/C vents
 
Quote:

Originally Posted by Kennuck (Post 6680491)
I will take group 2 Paypal ok? Please pm payment info.

I would take both groups for 65 shipped if that works for you?

Pm sent

Kennuck 05-19-2014 09:02 PM

Re: A/C vents
 
Payment sent for both.
Thanks
Ken

NC67Chev 05-19-2014 09:16 PM

Re: A/C vents
 
Thanks, I'll do my best to get it packed and to the post office tomorrow.

Kennuck 05-23-2014 04:23 PM

Re: A/C vents
 
Got the vents today. That Old Air center vent is indeed a very nice part. All the rest are in good shape too. The template to cut the dash was a nice surprise. Thanks so much.
Ken

NC67Chev 05-23-2014 06:27 PM

Re: A/C vents
 
I hope everything works out well for your project. I never sell stuff to make money, but rather pass things along that I decide not to use. I had the dash taped up on more than one occasion to cut out for the vents, but I just couldn't do it. After more than a year of seeing this stuff sit on the shelf, I realized it was time to let it go. Good luck!

Kennuck 05-25-2014 07:01 PM

Re: A/C vents
 
1 Attachment(s)
Got the vents installed today. The drivers side took me about an hour the old measure 20 times cut once ;) the passenger side only took me 20 minutes, and the center vent another 20 minutes. The hardest part with the center vent is the template goes off the original radio hole which thanks to the p.o. I don't have. I got it figured out though. Here's a pic with Mahanian's billet radio bezel installed too.

Thanks again for the nice vents.

NC67Chev 05-25-2014 08:37 PM

Re: A/C vents
 
That looks fantastic....nice job!! I'm glad they are going to good use.


All times are GMT -4. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com