![]() |
Brake Cylinder Question
Ok this might be a dumb question but are the wheel brake cylinders interchangeable from left to right side? My front brake hoses are too short when I crank the wheels all the way so I was just going to switch them around so the angle of the hose coming out of the cylinder would take the pressure off.
http://i791.photobucket.com/albums/y...ps3bd09fa7.jpg |
Re: Brake Cylinder Question
no they are left and right
|
Re: Brake Cylinder Question
Go on RockAuto. See if they offer two different ones. Let us know so if someone has the same question, you've already answered it here.
|
Re: Brake Cylinder Question
Are you sure they are installed correctly? From the phot i would assume they had been swapped side to side.
|
Re: Brake Cylinder Question
When the hoses come in at an angle, there is a difference between left & right. The catalogs list them that way.
|
Re: Brake Cylinder Question
Yeah they're on correct. They said Front left and Front right on the boxes so I know they're right. I think they'll be ok- they don't pinch when I crank the wheel but they get kinda tight. I double checked my brake lines too thinking maybe I got the wrong ones but they were right too. I guess it's just going to be weird that way.
|
All times are GMT -4. The time now is 07:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com