1970 6 lug wheel spacers?
 

Have a 1970 c10 with six lugs. Original wheels.
Have a later model mid 2000s chevy 16" alloy wheel/tire combo off a Tahoe / silverado.
Obviously the center axle between old truck and later model trucks is off about 1/4 inch or so. Bought a 3.5 inch hole saw. What a pain. I've decided not to go that route.
Hence wheel spacer idea.
Anyone know exact thickness I need???
1/4"? 3/8"? 1/2"???
I suspect many have done this before.
Thanks again.

PS: also would new lugs and or longer studs be required?

Re: 1970 6 lug wheel spacers?
 

I would use a 1" bolt on wheel spacer like this.
And maybe a 1-1/2" wheels spacer on the rear to help offset the track width differences.

Re: 1970 6 lug wheel spacers?
 

Those are pretty cool.
What kind are they???

Re: 1970 6 lug wheel spacers?
 

http://m.summitracing.com/parts/cal-75820

Looks like these will work???
Great idea. Thanks so much.

Re: 1970 6 lug wheel spacers?
 

I think you want a spacer with 7/16 thread.
Like these:
Amazon.com: Wheel Adapter 6 Lug 5.5" to 6...
The version you linked are metric,... but will work with metric lug nuts.

Re: 1970 6 lug wheel spacers?
 

Thanks again.
Read the review and someone used them on their older c10 truck.
Perfect!!!

Re: 1970 6 lug wheel spacers?
 

I would mock up the wheels on the truck and measure for spacer width that YOU like.