The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Routing for Door Jamb Switch Wires? (https://67-72chevytrucks.com/vboard/showthread.php?t=638939)

Bean Counter

08-09-2014 12:47 PM

Routing for Door Jamb Switch Wires?

I've started installing/re-installing my wiring harness. Thanks to a lack of pictures and short-term memory, I don't remember how to route the door jamb switch wires from the inside of the cab to the door frame:whine:. Can anyone share some pics or wisdom on this?

Also, if you've used a painless harness in your truck, did it come with the dome/cargo lamp harness? If it does, then I can add that to the list of things I've lost as well.

Thanks,
David

FirstOwner69

08-09-2014 06:15 PM

Re: Routing for Door Jamb Switch Wires?

2 Attachment(s)

The pictures below show how they go through the kick panels. Driver side is top, passenger side is bottom. Both sides originally had grommets.

Bean Counter

08-10-2014 08:50 AM

Re: Routing for Door Jamb Switch Wires?

Thank you, FirstOwner! I'll run to the hardware store and see if I can find something to use as the grommet.
David

All times are GMT -4. The time now is 11:15 AM.