1970 chevy truck parting out
 

1970 c10 PS,PB A/C
A/C BRACKETS 150.00 SHIPPED
POWER STEERING PUMP AND BRACKETS 100.00 SHIPPED
POWER STEERING BOX 100.00 SHIPPED

Re: 1970 chevy truck parting out
 

Looks like a pretty nice truck to be parting out. Interested in the front grill (outer & inner) if original 70 style with horizontal bars. Any pictures? Also how are bumpers?

Re: 1970 chevy truck parting out
 

How much for the center a/c vent to 84043 ? How is the dash pad and door panels?
Thanks, Paul

Re: 1970 chevy truck parting out
 

nice looking truck!! I just picked up a 69 C20. How much for the set of chromeblack trim pieces on both sides of the truck? Are they being parted out?
thanx

Re: 1970 chevy truck parting out
 

Front bumper 150.00 shipped its stright has normal scratches
center a/c vent 30.00 shipped its nice orginal condition
door panels nice driver condition normal wear comes with the armrest 175.00 shipped
more pictures on the way

Re: 1970 chevy truck parting out
 

Tail light harness cond cuts,splices?up close pics pls.

Re: 1970 chevy truck parting out
 

Pictures

Re: 1970 chevy truck parting out
 

The grill and rear bumper is no good

Re: 1970 chevy truck parting out
 

the trim is all there but just in ok condition

Re: 1970 chevy truck parting out
 

How about a price for the complete A/C system front to back shipped to Washington state, 98933? Don't need the compressor brackets or any of the vents in the dash, but do need the actual ducting behind the dash.

thanks,

Keith

Re: 1970 chevy truck parting out
 

do you need the a/c hoses this air is in working condition

Re: 1970 chevy truck parting out
 

I could use them. Is the system still R12, or has it been converted to R134?

Re: 1970 chevy truck parting out
 

how much for the set all around the. ok is fine, I'm just getting started and doing a poor man's restore, so mainly just want the pieces, not trying to do a pristine restore, just have a complete (although rough) truck

Re: 1970 chevy truck parting out
 

ill take 100.00 plus shipping for all of it but i will need to check on shipping because the bed trim is so long

Re: 1970 chevy truck parting out
 

ir is r 12 ill take 375.00 shipped for both boxes duct work and the hoses

Re: 1970 chevy truck parting out
 

Is inner grill cracked?

Re: 1970 chevy truck parting out
 

inner grill is cracked

Re: 1970 chevy truck parting out
 

The rubber lines have to be changed out for conversion to R134, so I can't use those. So, I can use the evap. box, the heater core box, the metal ac lines, and all the ducting under the dash? How about the condenser and all the metal lines to and from? If it's a working system can I get the compressor also? Vacuum actuators for the venting? Controls in the dash?

thanks

Re: 1970 chevy truck parting out
 

could we please do that? I'm a newbie on the forums, so how do we do this? am i allowed to give you my phone number so we can solidify the deal? please let me know about the shipping cost- but I'm not rushing you, just want to make sure i can get the set

Re: 1970 chevy truck parting out
 

all that for 525.00 shipped

Re: 1970 chevy truck parting out
 

Sounds very fair. I'll take all of it.

Since I am putting A/C in a non A/C blazer I could also use all the little things I am not thinking of right now. Here's a few other things off the top of my head.

Plastic vacuum canister and all the lines if they are still good
A/C battery tray (if it is good)
Receiver/dryer mount (I'll need to get a new one for the R134)
grommets from the firewall and radiator support


basically, anything my non A/C blazer does not have.

I'll send a PM for the details.

thanks,

Keith

Re: 1970 chevy truck parting out
 

you can call me if you want 770 468 7776 most of the time i can estimate shipping and be real close but the bed trim is very long so i will measure the long ones and get a shipping

Re: 1970 chevy truck parting out
 

sounds good

Re: 1970 chevy truck parting out
 

heres a picture of the wood bed i made with plywood great for a low budget

Re: 1970 chevy truck parting out
 

how much for all the shift linkage? shipped to 13438. Thanks, Dan