The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - GA Wtb factory bumper guards (https://67-72chevytrucks.com/vboard/showthread.php?t=662621)

hold24

03-07-2015 09:16 AM

Wtb factory bumper guards

WTB front factory oem bumper guards a nice set

PICKMUP

03-07-2015 11:38 AM

Re: Wtb factory bumper guards

I have one NOS pair @ $300 + $20 s/h...

Tdrcreyn4

03-07-2015 12:06 PM

Re: Wtb factory bumper guards

2nd in line.

hold24

03-07-2015 12:58 PM

Re: Wtb factory bumper guards

p.m you

davestrucks

03-07-2015 01:08 PM

Re: Wtb factory bumper guards

I have a nos set . same deal $320.00 shipped.

PICKMUP

03-07-2015 02:01 PM

Re: Wtb factory bumper guards

4 Attachment(s)

Here's your pics. Chrome & rubber is perfect! All hardware. One box to show they are Gen GM. NOTE: these are the original early style, exactly as came on the trucks...NOT the ribbed after market style that GM sold later, under the same #. Make sense? And notice I did not raise the price, just because you were looking. frank

hold24

03-07-2015 02:26 PM

Re: Wtb factory bumper guards

I'll take them...

Tdrcreyn4

03-08-2015 06:11 PM

Re: Wtb factory bumper guards

DavesTrucks ..... I'll take your set if still available. PM sent.

davestrucks

03-08-2015 08:57 PM

Re: Wtb factory bumper guards

5 Attachment(s)

pics

davestrucks

03-08-2015 09:07 PM

Re: Wtb factory bumper guards

Chrome is hard to take pics of ,these are very nice. Thanks

Tdrcreyn4

03-09-2015 05:26 AM

Re: Wtb factory bumper guards

Looks good. Thanks, I'll send payment.

davestrucks

03-09-2015 12:01 PM

Re: Wtb factory bumper guards

Sold.

PICKMUP

03-09-2015 03:17 PM

Re: Wtb factory bumper guards

Quote:

Originally Posted by hold24 (Post 7079755)

WTB front factory oem bumper guards a nice set

Here's a set of caps I just finished...a lot of work to get the finish to match on all four (5). I actually had to over polish some sections and then dull them down to get them all the same matching finish.
You can see they are normally $250 for a set of four. I will add an extra free rear cap to allow for any dings, etc. Notice, no splits, big pry dents, or major damage.
$250 + $20 s/h

PICKMUP

03-09-2015 03:19 PM

Re: Wtb factory bumper guards

4 Attachment(s)

Ooops. Forgot pics...

All times are GMT -4. The time now is 08:29 AM.