3500 GMC front disc conversion
 

I have a 68 GMC one ton and a 82 Chevy one ton parts truck. I was wondering if the front suspension cross member from the 82 will work in the 68 like the 1/2 tons. Or has anyone set a 68 cab and front clip on a 82 style one ton chassis?

Re: 3500 GMC front disc conversion
 

I also have a 68 3500. I've done almost everything except the disc conversion. I just wanted to chime in and wish you luck. Post the results for those of us hoping to avoid the problems. As far as the cab swap, you may have title issues. At least that's the case here in Texas. Good luck

Re: 3500 GMC front disc conversion
 

Re: 3500 GMC front disc conversion
 

Thanks for the link but it appears to be for 1/2 ton trucks, not 1 tons

Re: 3500 GMC front disc conversion
 

Thanks for the link but it appears to be for 1/2 ton trucks not 1 tons

Re: 3500 GMC front disc conversion
 

I have a 68 Chevy 1 ton and a 79 Chevy 1 ton donor. I pulled out the entire crossmember and installed the new one from the donor a couple weeks ago. My build thread "Meet Homer" shows this. Just like the 1/2 tons you have to drill one new hole and elongate one hole on the side of the frame, "BUT, the 1 ton donors have an extra piece (c channel) that goes inside the frame that requires drilling one more hole through the top frame rail. The older frames did not have this piece so you could probably get by without it, but I figured the GM engineers did not put it in the 79's just for fun, so I used it.
No big deal. I pulled both out and new one in in one day by myself so if you got any help piece of cake.

Re: 3500 GMC front disc conversion
 

Thank you copperhw, I wrecked my 68 c10 Monday so I need to get going on the one ton, o also have a 68 Chevy cab and front clip I am going to use on the 3500. I like the looks of the Chevy better.

Re: 3500 GMC front disc conversion
 

You are welcome. Sorry to see your hurt truck.