![]() |
Project "Steppin Wolf" LS swap
Hey guys. I've been trolling around for about a year now reading up on ls swaps and I've finally pulled the trigger on my own! I got an 06 LQ4 with 118k on it a week ago for $1200 and I've been hard at it cleaning, painting, and ordering parts. I've got lots of questions and I'm sure I'm in the right place for answers so hopefully this helpful bunch can get me swapped out and driving in the next month or two.... Heres the plan..
LQ4/4L80 swap. I'm also installing the 25 gallon fuel tank out of an 87 blazer, ac delco pump and corvette filter/regulator. All this is already ordered along with a set of cheap ebay swap headers(hey, I'm on a budget). This is going into my 74 stepside, hence the name project Steppin Wolf. Now, before I get blasted.....how the heck do I go about posting pics?? |
Re: Project "Steppin Wolf" LS swap
Well, till I figure out how to get some pics up, how bout I go on to a few questions? I'm using my stock radiator so what radiator hoses do I use? I am also missing the harness that goes from the TAC module to the gas pedal and was wondering if anyone might have one for sale. I found custom made ones for $50 on Ebay but was hoping to find one a bit cheaper.
|
Re: Project "Steppin Wolf" LS swap
|
Re: Project "Steppin Wolf" LS swap
Got some parts in today
http://i1382.photobucket.com/albums/...psggjc0ek3.jpg http://i1382.photobucket.com/albums/...pselrreyxo.jpg I ordered these fittings...has anyone ever used these? http://i1382.photobucket.com/albums/...ps5nfj0blv.jpg http://i1382.photobucket.com/albums/...psczcfalww.jpg the new to me LQ4 http://i1382.photobucket.com/albums/...ps7lawtdin.jpg And the engine its going to be replacing http://i1382.photobucket.com/albums/...pscgghdk5y.jpg Brackets and things I've been repainting..... http://i1382.photobucket.com/albums/...psczqrygh1.jpg Shes really dirty. this was after four hours of cleaning. gonna do some more tomorrow. still going through a couple different color options in my head. http://i1382.photobucket.com/albums/...psbbybvblq.jpg |
Re: Project "Steppin Wolf" LS swap
The new fuel pump,sending unit, and tank straps for the blazer tank should all be here tomorrow so I can start figuring out my fuel system. I'm also waiting on my headers and still looking for a decent deal on a 4L80 transmission.
|
Re: Project "Steppin Wolf" LS swap
fuel pump came in today. Also spole with Jesse at Wait4meperformance. got my ECU and wire harness boxed up and ready to ship out to him tomorrow. :)
http://i1382.photobucket.com/albums/...psrutgft8x.jpg http://i1382.photobucket.com/albums/...psxgzpr08w.jpg |
Re: Project "Steppin Wolf" LS swap
I guess nobodies interested in another boring swap?
|
Re: Project "Steppin Wolf" LS swap
i always am
|
Re: Project "Steppin Wolf" LS swap
I'm glad somebody replied...I was about to stop wasting time uploading pics! lol
|
Re: Project "Steppin Wolf" LS swap
Well, I got my harness and ECU shipped off to Jesse at Wait4me Performance today. Tank straps for the blazer tank came in today as well so if I get some time off work this weekend I may start trying to figure out my mounts for that and where Im gonna run the filler tube to. I had a brain storm awhile ago but Im gonna save it as a surprise if it works out.... ;)
|
Re: Project "Steppin Wolf" LS swap
That engine looked so nice I wouldnt have touched it! Im lazy though.
Can you post pics of the harness? I was thinking of using them for my swap. Did you like the result? |
Re: Project "Steppin Wolf" LS swap
engine was filthy. Ill be posting pics after its clean and painted.
I just sent the harness off today so it'll be a couple weeks before i get it back. |
Re: Project "Steppin Wolf" LS swap
I meant the old one lol
|
Re: Project "Steppin Wolf" LS swap
Picking up an LQ4 this weekend..For my '84 stepper..
The owner cut the harness, So I'll be starting from scratch. Subscribed.. |
Re: Project "Steppin Wolf" LS swap
Nice work! Wish I could find an LQ4 to swap into mine.
|
Re: Project "Steppin Wolf" LS swap
Quote:
|
Re: Project "Steppin Wolf" LS swap
So I got my sending unit in today and I've got some questions regarding npt to an adapters and electrical connections....
|
Re: Project "Steppin Wolf" LS swap
so first off, does anyone know what size these threaded npt,s are? I want to order the correct npt to AN adapters. I'm thinking one is 3/8 and the other 5/16? also, do I just use a vacuum cap on the fourth line since im not going to be using the evap system? and finally, what is this electrical connector for the fuel pump and fuel gauge sender called and where can I buy a female to match it? I realize I could just hardwire the two wires but Id love to have the correct connector for it instead.
http://i1382.photobucket.com/albums/...psoq6wr87s.jpg http://i1382.photobucket.com/albums/...psvwns0ca0.jpg |
Re: Project "Steppin Wolf" LS swap
Anyone?? Bueller??? Anyone???
|
Re: Project "Steppin Wolf" LS swap
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=349201 Or ask Aggie (Post 50): http://67-72chevytrucks.com/vboard/s...=632305&page=2 |
Re: Project "Steppin Wolf" LS swap
found some adapters made by Russell and ordered them today. Found the matching weather-pac connector at pep boys yesterday.
|
Re: Project "Steppin Wolf" LS swap
The engine I got didnt have the harness that goes from the pedal to the Tac Module so I ordered a brand new one from PSI Conversions.
http://i1382.photobucket.com/albums/...ps8ckcd1yr.jpg Also found an Ebay company that sells the vette filter/regulator with all the AN-6 adapters includung one for your fuel rail in one kit. For the price, I basically got the fuel rail adapter for free. http://i1382.photobucket.com/albums/...psowrsotoi.jpg Fuse Block http://i1382.photobucket.com/albums/...psgvmu8zjs.jpg more stuff should be coming in tommorrow. Now if I could just get some time off to actually use some of this crap!!! LOL |
Re: Project "Steppin Wolf" LS swap
Ok. Got my attention. I'm just about to start my 5.3 swap. Where are u getting all the fuel fittings ? What's the pump from? Part number? What's the fuse block for?
|
Re: Project "Steppin Wolf" LS swap
fuel pump is an AC Delco EP381, the filter/regulator and the fittings that came with were found in an "LS swap fuel kit" on ebay. all the other fittings are being ordered from summit racing.fuse block and the relays that arent here yet are to tie into wire harness for ignition, fuel pump,and whatever else...maybe electric fan later on. Ill be making a list of expenses and part numbers at some point.
|
Re: Project "Steppin Wolf" LS swap
Here is a screenshot of the fittings and hose i ordered tonight to run my fuel system. the gauge takeoff is optional as I'm choosing to install a small gauge on the back of my fuel rail
http://i1382.photobucket.com/albums/...pso4tcojoj.png Thhis is the filter/regulator/fitting kit I got off ebay. It has the new screw on Russell fittings instead of the old quick connects. http://www.ebay.com/itm/LS1-Full-Flo...408649?vxp=mtr |
All times are GMT -4. The time now is 11:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com