![]() |
Alternative heater in AD
1 Attachment(s)
I bought a BL mini heater, checked it worked, pulled it apart & painted it/fitted s/steel screws.
|
Re: Alternative heater in AD
1 Attachment(s)
Under the dash on the bulkhead there's 2 channels running upwards & at an angle, these have 2 holes in them 1 near the top & 1 near the bottom. I enlarged the holes at the top to about 3/8" & put a 6mm rivnut in there. I then made up some brackets to hold the heater. I haven't run any hoses in yet
|
Re: Alternative heater in AD
Looks good. It should put out plenty of heat for the truck cab too.
|
All times are GMT -4. The time now is 07:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com