The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Metal Brake Fabrication (https://67-72chevytrucks.com/vboard/showthread.php?t=684330)

smitroc

10-04-2015 04:32 PM

Metal Brake Fabrication

Hi everyone,
Anyone out there have a simple design for a 3 in 1 or 3 seperate metal brake chop, bend, fold?
Love to see some plans on this... Looking to setup my own here in the corner of the garage my wife lets me use for a play area!
Thx

smitroc

10-04-2015 04:39 PM

Re: Metal Brake Fabrication

Bend, roll, shear would be the proper term... Just fyi'ing myself there!

franken

10-04-2015 05:15 PM

Re: Metal Brake Fabrication

Try google. There are many.

Redline novdog

10-04-2015 09:52 PM

Re: Metal Brake Fabrication

I have a homemade one from a very talented man around here. I have never dimensioned it. but I can post some pics if desired. It is a brake,bead roller, and sheet roller.The bead roller dies he made on a lathe. His son made the sheet rollers on a big lathe.

Fitz	10-05-2015 02:00 PM

Re: Metal Brake Fabrication

Quote:

Originally Posted by smitroc (Post 7329858)

Try here:

studebakercarclubnsw.com/pdf/panbrake.pdf

I built this one several years ago and it works just fine!

Jason Banks

10-05-2015 08:37 PM

Re: Metal Brake Fabrication

I have seen that studebaker design before and it looks great. You should go look at priate4x4.com those guys make everything.

Fitz	10-06-2015 11:30 AM

Re: Metal Brake Fabrication

Quote:

Originally Posted by Jason Banks (Post 7331409)

I have seen that studebaker design before and it looks great. You should go look at priate4x4.com those guys make everything.

pirate4x4.com

rcazwillis

10-06-2015 02:05 PM

Re: Metal Brake Fabrication

I have had this one tagged for years. Appears to be the same design as the studebaker. Different detail on the build.

http://www.woodworkforums.com/45792-...n+brake+folder

All times are GMT -4. The time now is 06:23 PM.