The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Parting out 1970 3/4 Longhorn (https://67-72chevytrucks.com/vboard/showthread.php?t=695075)

bronze 72 super 01-17-2016 10:39 PM

Parting out 1970 3/4 Longhorn
 
5 Attachment(s)
truck is sold and gone. Thanks for all the inquiries . Mike.

Blue/72 01-17-2016 10:48 PM

Re: Parting out 1970 3/4 Longhorn
 
What is the condition of the inner grill?

bronze 72 super 01-17-2016 10:52 PM

Re: Parting out 1970 3/4 Longhorn
 
Has two mounting tabs broke on top drivers side, can be epoxed or glued. Otherwise good used condition. I prefer to sell as a whole unit, won't sell inner and outer surround separate. Asking $200 for complete unit.

Cash3481 01-17-2016 10:53 PM

Re: Parting out 1970 3/4 Longhorn
 
What's the condition of the 3 period correct caps?
Wish you were closer... I could use the 3.54 Dana 60.

bronze 72 super 01-17-2016 10:55 PM

Re: Parting out 1970 3/4 Longhorn
 
Has two period cabs, front ones are '75 up. Driver quality only, usual dents, faded metal. I take $30 for both plus shipping.

DogueParamour 01-17-2016 11:34 PM

Re: Parting out 1970 3/4 Longhorn
 
Would you ship the bench seat to San Diego?

bronze 72 super 01-17-2016 11:41 PM

Re: Parting out 1970 3/4 Longhorn
 
Sorry but to ship this would cost more than what the seat is worth. It would have to be truck shipped and that isn't cheap.

skylerlt 01-17-2016 11:46 PM

Re: Parting out 1970 3/4 Longhorn
 
What's the condition of the high hump, and would you ship to Oklahoma City?

bronze 72 super 01-17-2016 11:58 PM

Re: Parting out 1970 3/4 Longhorn
 
I'll check tomorrow and get back with you.

bronze 72 super 01-18-2016 07:17 PM

Re: Parting out 1970 3/4 Longhorn
 
bump

bronze 72 super 01-18-2016 09:15 PM

Re: Parting out 1970 3/4 Longhorn
 
skylerlt high hump is in very good to excellent condition. I didn't see any issues with it. Can post pics. later this week if still interested. Asking $125 plus shipping.

PICKMUP 01-18-2016 09:21 PM

Re: Parting out 1970 3/4 Longhorn
 
Do you have a few stock clutch fans?

Dave 01-18-2016 09:22 PM

Re: Parting out 1970 3/4 Longhorn
 
What's your price on the aluminum aux fuel doors, wiring and selector valve by the seat?
Lmk, thx Dave.

bronze 72 super 01-18-2016 09:31 PM

Re: Parting out 1970 3/4 Longhorn
 
Frank, I have only one stock clutch fan, I do have two others one pulled from a '67 Grand Prix 400 engine, and one other I'm not sure what I pulled it from. The one stock one come off my '71 402, asking $50 plus shipping.

bronze 72 super 01-18-2016 09:34 PM

Re: Parting out 1970 3/4 Longhorn
 
Dave, there is no wiring with the dual tanks. I do have several selector valves. I can post pics later this week if you are still interested. Valve with doors, $50 plus shipping.

Synestran 01-19-2016 05:27 PM

Re: Parting out 1970 3/4 Longhorn
 
What's the condition of the heater box? Looking to add heat to my truck.

bronze 72 super 01-19-2016 10:09 PM

Re: Parting out 1970 3/4 Longhorn
 
P.M. set

Dave 01-19-2016 11:31 PM

Re: Parting out 1970 3/4 Longhorn
 
Quote:

Originally Posted by bronze 72 super (Post 7452698)
Dave, there is no wiring with the dual tanks. I do have several selector valves. I can post pics later this week if you are still interested. Valve with doors, $50 plus shipping.

Ok thx, I'll wait for pics.

CG 01-20-2016 12:00 AM

Re: Parting out 1970 3/4 Longhorn
 
Hard to tell in the pics ... what kind of shape is the grill surround and headlight rings. I read that inner has a couple of broken tabs. You want 200 for the whole assembly, inner outter and headlight bezels?

mo 01-20-2016 12:07 AM

Re: Parting out 1970 3/4 Longhorn
 
What's the condition of the dash pad?
Pics price shipped to 93013
Thanks. Mo

bronze 72 super 01-20-2016 01:33 AM

Re: Parting out 1970 3/4 Longhorn
 
CG , yes $200 for the whole grill assembly. It's nice driver quality. That includes everything in the pictures. Tabs are still there, just broke off were they connect to the grill, easy fix.

bronze 72 super 01-20-2016 01:34 AM

Re: Parting out 1970 3/4 Longhorn
 
MO, dash pad isn't in that good of shape, warped and cracked. Shipping would be more that what it is worth.

Blue/72 01-20-2016 02:42 AM

Re: Parting out 1970 3/4 Longhorn
 
Does it have a lighted lighter? How is the front bumper and condition of the windshield? Thanks

tmg619 01-20-2016 12:13 PM

Re: Parting out 1970 3/4 Longhorn
 
Your asking 500 for the truck? Am I reading that rite. Where are you located.

bronze 72 super 01-20-2016 01:03 PM

Re: Parting out 1970 3/4 Longhorn
 
Yes that's right, buy the whole truck save some money from buying parts separate. P.M. sent to TMG619


All times are GMT -4. The time now is 06:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com