The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   high hump holes (https://67-72chevytrucks.com/vboard/showthread.php?t=707609)

truckkeepsmesane 05-20-2016 08:09 PM

high hump holes
 
I am converting my truck to four wheel drive and I was wondering if any of you would be able to tell me the dimensions and location of the hole for the transfer case shifter. My high hump is in great shape so I plan on modifying it myself. Thanks for the help!

69chevytrucker 05-20-2016 08:18 PM

Re: high hump holes
 
2 Attachment(s)
i did some custom work to my 69 dont know if it would be the same i just guessed from where the linkage ended on the tc and cut the hole then adjusted the linkage to fit but i used a hump from a 83 blazer and cut a few inches out
Attachment 1534802

Attachment 1534803

truckkeepsmesane 05-21-2016 08:58 AM

Re: high hump holes
 
Thanks for the input!


All times are GMT -4. The time now is 10:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com