250 Inline 6 cylinder engine parts
 

I have parts for two different 250 engines. I was going to make one out of both of these and put them in Halen's truck, but we've decided to go a different route.

She's trying to save up money because she wants to go to Dino's Git Down in November with me so I told her if she got half the money I would take care of the other half. So we are selling these parts to try to get her some travel $$$$

I have pretty much two of everything. Brakcets, Pistons, Carbs, etc.

Pulley's-$10 plus shipping
Thermostat Housings-$20 plus shipping


There's a lot here to pick through, just let me know what you need.

http://i299.photobucket.com/albums/m...psmdfrojqm.jpg

http://i299.photobucket.com/albums/m...pscelrddil.jpg

http://i299.photobucket.com/albums/m...psp38sj7rd.jpg

http://i299.photobucket.com/albums/m...psougzdvn8.jpg

http://i299.photobucket.com/albums/m...pswjzp6ypz.jpg

http://i299.photobucket.com/albums/m...pscadsgvwm.jpg

Re: 250 Inline 6 cylinder engine parts
 

Interested in Carb(s) and oil pan(s) pending price shipped to 37820 ?

Re: 250 Inline 6 cylinder engine parts
 

Do you need the pickup tubes as well?

Re: 250 Inline 6 cylinder engine parts
 

Shoot me a price both ways ? Are both engines disassembled ? How much for both in pieces ?
Posted via Mobile Device

Re: 250 Inline 6 cylinder engine parts
 

I'm interested in a 2 groove water pump pulley, shipped to 72416. Thanks.

Re: 250 Inline 6 cylinder engine parts
 

Air cleaner shipped to 45140?

Re: 250 Inline 6 cylinder engine parts
 

Do you have the metal tube from the base of the carb to the distributor?
Posted via Mobile Device

Re: 250 Inline 6 cylinder engine parts
 

I have to pass on both disabled engines but I'm still interested in these parts ?

Re: 250 Inline 6 cylinder engine parts
 

What shape (measurements wise) is the Engines in, size bore, do you know if its been Deck'd, any in large'd/line bored cam & crank areas??? If you would ship then how & too 92284, thanks

Re: 250 Inline 6 cylinder engine parts
 

What shape (measurements wise) are the engines in, bore size, do you know if its been Decked, any Inlarge'd / line bored Cam or Crank areas???

Re: 250 Inline 6 cylinder engine parts
 

Any power steering parts/brackets?

Re: 250 Inline 6 cylinder engine parts
 

What size are the pistons in, Std or any + sizes/over bore?

Re: 250 Inline 6 cylinder engine parts
 

They are standard


Hey guys, bare with me on getting prices. I got stuck working 16 hour days the day after I made the post. Going on 4 hours sleep a day.

Re: 250 Inline 6 cylinder engine parts
 

No power steering parts.

Re: 250 Inline 6 cylinder engine parts
 

I need a good stock block for my boat, do you have a block that is rebuildable without needing bored ?

Re: 250 Inline 6 cylinder engine parts
 

$100 plus shipping

Re: 250 Inline 6 cylinder engine parts
 

$20 plus shipping

Re: 250 Inline 6 cylinder engine parts
 

I'm sorry, I don't.

Re: 250 Inline 6 cylinder engine parts
 

Yes, the one pictured is fine. $50, no shipping

Re: 250 Inline 6 cylinder engine parts
 

Great price unfortunately I didn't realize Whitehouse is 7 hrs from me thank you though

Re: 250 Inline 6 cylinder engine parts
 

Is this sold? Is it original to the 250 and did it line up to the alternator? I have several that fit the water pump, but do not line up to right...

Re: 250 Inline 6 cylinder engine parts
 

I need both oil pans shipped to 37820 :chevy:

Re: 250 Inline 6 cylinder engine parts
 

interested in a carb if still available ? if so, price shipped to 54452, thanks