The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NY WTB Traclock or Powerlock carrier for Dana 60 (https://67-72chevytrucks.com/vboard/showthread.php?t=720094)

juddss 10-13-2016 07:08 PM

WTB Traclock or Powerlock carrier for Dana 60
 
Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

68350 10-13-2016 07:27 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
I got mine here off the board for 200. So hopefully someone has one for ya. I got the powerlok in my 71 n 72 gmcs and love it

w314speed 10-13-2016 07:28 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by juddss (Post 7741471)
Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

I have a good one! I will look in the AM, but I think it has new posi clutch dic plates! I will PM with price and info. Thanks, Dan

randy500 10-13-2016 08:45 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Never thought of getting one off here...I need one for my...cough...Dodge Dart! Next in line if anyone has another for sale, after OP of course.

gmc 2500 4x4 10-14-2016 05:59 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
i have one or the other i bought off here, and not going to use. but i have 354 ratio and was bought for the swap out. not sure on carrier compatibility. i will figure it out today, i have about 200.00 in this

w314speed 10-14-2016 07:37 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
5 Attachment(s)
This unit is 30 spline and is good for 3:54 to 4:11 gears. As the pics show, it has all new internal gears and clutch plates. I collected parts and built it for my 72 Custom Camper with Dana 60 and just recently sold it. Obviously, I have more than the $325 plus shipping that I need for it. LMK Thanks, Dan

juddss 10-14-2016 09:02 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
GMC 2500 4x4 Let me know
W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

w314speed 10-14-2016 09:29 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by juddss (Post 7741961)
GMC 2500 4x4 Let me know
W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

Sorry! Going back to my 31 spline 67-68 442 performance axles. You are correct at 30 spline for the Dana 60. Thanks, Dan

68350 10-14-2016 09:35 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
The factory dana 60 in our trucks should have 30 spline axles, at least in 71/72

gmc 2500 4x4 10-14-2016 10:17 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Well what I have ain't turning. And I don't have 200 in this. I paid 75.00 from Dan. Don't know if it seized or what. It would need gone thru. So no guarantees

juddss 10-14-2016 10:43 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Any pics? Do you have 354 gears as well? What else comes with it?

gmc 2500 4x4 10-14-2016 01:30 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
4 Attachment(s)
this is what i have, no gears. 10/19/71, spicer#27161x

juddss 10-14-2016 02:17 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Ok so the spiders are seized. What do you want for it.

gmc 2500 4x4 10-14-2016 07:03 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
what i paid, 75.00 and shipping

w314speed 10-14-2016 07:18 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

randy500 10-14-2016 10:59 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by w314speed (Post 7742378)
The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

I'm interested, what do you have and how much?

juddss 10-15-2016 03:02 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by gmc 2500 4x4 (Post 7742373)
what i paid, 75.00 and shipping

You ever come towards Syracuse? I'll think on it tomorrow. I have to research the true track.
Dan how much for ring and pinion. They are used correct?

w314speed 10-15-2016 04:53 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by juddss (Post 7742655)
You ever come towards Syracuse? I'll think on it tomorrow. I have to research the true track.
Dan how much for ring and pinion. They are used correct?

They are used. $125 plus shipping and paypal fees or MO fine. LMK Thanks, Dan

w314speed 10-15-2016 05:05 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by randy500 (Post 7742542)
I'm interested, what do you have and how much?

Let JUDDSS and Paul finalize there deal. I sold Paul the best one I had, so if still available, don't pass on his. Thanks, Dan

gmc 2500 4x4 10-15-2016 06:55 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by w314speed (Post 7742378)
The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

thanx dan, i know nothing on these. its a good price if ya want oem

juddss 10-15-2016 10:22 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by w314speed (Post 7742664)
Let JUDDSS and Paul finalize there deal. I sold Paul the best one I had, so if still available, don't pass on his. Thanks, Dan

Thanks Dan and Paul. I plan on maybe putting down 625 Hp with my supercharged Ls motor. I just want to see what one will handle the power. What do you think Dan? You seem very knowledgeable on these.

juddss 10-15-2016 10:46 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me.
Dan who makes the true trac Detroit?

w314speed 10-16-2016 10:16 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Quote:

Originally Posted by juddss (Post 7742795)
Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me.
Dan who makes the true trac Detroit?

I don't know. I have tried to run the Cast #s, but find nothing concrete. I can assume that the true-trac is a Dana product for basic posi and the Power-Lok was an option that was specific to our trucks on the Spid Label. Maybe, some of our other board members have some input! LMK about the 3:54 gears. Thanks, Dan

gmc 2500 4x4 10-16-2016 10:22 AM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
Workin now, that is a spicer# on that unit. I give u more info when I get home. Pm your address so I can get a quote

gmc 2500 4x4 10-16-2016 06:19 PM

Re: WTB Traclock or Powerlock carrier for Dana 60
 
check out this link: http://therangerstation.com/tech_lib...ana_axle.shtml


All times are GMT -4. The time now is 01:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com