L6 250/292 A/c bracket
 

I stopped in one of my local scrap yards the other day and came up with this hoard of parts , I found the stock A/C bracket / 2 groove pulley on a 67 Biscayne 4 door the power steering was already gone the 2 Chevrolet Script valve covers came from a 66 Chevelle 4 door and the 67 Biscayne .Sway bar off a long bed frame

Total cost $50.00 :metal::metal:

http://http://i957.photobucket.com/albums/a...pspyvm9ru8.jpg

After some clean up in my glass bead cabinet the valve covers will look great ! :chevy:

http:// http://i957.photobucket.com/albums/a...psbolk8mel.jpg


I looked on ebay and there was one A/C bracket listed for $350.00 and the 3 shims for $40.00 from the same seller .

http://http://i957.photobucket.com/albums/a...psxqbpxcug.jpg

http://http://i957.photobucket.com/albums/a...psptkaebli.jpg

Re: L6 250/292 A/c bracket
 

-
Looks like you did good! Just proves that stuff is still around if you go out and beat the bushes..... I just picked up a '77 Van tilt and a pretty nice '69-'70 grille surround yesterday morning.

LockDoc

Re: L6 250/292 A/c bracket
 

Good save! We need more threads like these...

Re: L6 250/292 A/c bracket
 

I looked for that A/C bracket for 2 years ,It will be going on my 292 I just bolted it to the 250 engine so it didn't get lost in the shop . I have a stack of parts 5' high sitting next to my blast cabinet waiting to be cleaned :lol:


"Just proves that stuff is still around if you go out and beat the bushes" Around here everythings already starting to turn green , once the leaves and thorns come in a lot of this stuff will be buried until fall again !

Today it will be 70 and then snow all weekend long ?

Re: L6 250/292 A/c bracket
 

A lot of the small block and 6 cylinder motor parts inter change off of cars and trucks. Most people get hung up on the truck only parts and walk right by a car with the same part on it. If you need a good alternator bracket any small block Chevy car from the 60's will have the same brackets as our trucks. :chevy:

Re: L6 250/292 A/c bracket
 

That is a rare find!
You and I would get along great!
I go to the U-Pull-It so often that they seldom charge me to get in.They know I'm going to buy something!I also go to estate sales.
I have many GM brackets and pulleys in my pile.Including the one you found.
And,an NOS power steering bracket for a 250 six.
I blast parts just about everyday and will never catch up!

http://i962.photobucket.com/albums/a...cket/016_1.jpg

Mike.:chevy: