Looking for ref pic of driver inner fender
 

I'm slowly taking apart the front end of my 70 C10. The driver fender around the steering brace is a bit wrinkled. The steering brace fits on, and it fits into the fender in general, but I figured I'd at least bend it back into place since I'm going to paint it. And is the steering brace supposed to be that bent? If someone has a fender out, can you take a couple close ups of these same spots?

http://i59.photobucket.com/albums/g3...a/IMG_3362.jpg

http://i59.photobucket.com/albums/g3...a/IMG_3363.jpg

http://i59.photobucket.com/albums/g3...a/IMG_3364.jpg

http://i59.photobucket.com/albums/g3...a/IMG_3365.jpg

http://i59.photobucket.com/albums/g3...a/IMG_3366.jpg

Re: Looking for ref pic of driver inner fender
 

I'm pretty sure mine is completely straight.

I would take a picture but I'm not where it is. But it's off the truck because I just blasted it to prep for paint.

Re: Looking for ref pic of driver inner fender
 

i have one out. here you go...

Attachment 1647174

Attachment 1647175

Attachment 1647176

Attachment 1647177

Attachment 1647178

Re: Looking for ref pic of driver inner fender
 

Ha, I thought the bend in my brace was normal... I know the front of my truck has been hit and it makes me worry if I change bend stuff too far into shape, it won't go back together.

Re: Looking for ref pic of driver inner fender
 

I think the bend is normal, mine looks like yours.

Re: Looking for ref pic of driver inner fender
 

Mine are all straight.
Mike.:chevy:

Re: Looking for ref pic of driver inner fender
 

-
Both of them should be straight....

LockDoc

Re: Looking for ref pic of driver inner fender
 

I have mine off at the moment, it is straight as can be.