The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   350 Stock Exhaust Upgrade Suggestions ? (https://67-72chevytrucks.com/vboard/showthread.php?t=736959)

54blackhornet 05-02-2017 01:39 PM

350 Stock Exhaust Upgrade Suggestions ?
 
Planning on replacing the stock exhaust on my 71 GMC, 350 with original 2in ramshorn manifolds. Was quoted over $800.00 by local shop to build a dual setup. Any suggestions would be appreciated...thanks:metal:

dfwright 05-02-2017 02:41 PM

Re: 350 Stock Exhaust Upgrade Suggestions ?
 
2 Attachment(s)
I bought the Hooker dual exhaust kit from JEGS for my '72 -- Hooker #16621HKR,
along with a pair of the recommended Hooker #21005HKR mufflers. The grand total for the kit and mufflers came in around $300 or so at the time. Other than the fact that the mufflers are louder than I would like (wish I had gotten larger mufflers) I am very happy with this kit

54blackhornet 05-03-2017 12:10 PM

Re: 350 Stock Exhaust Upgrade Suggestions ?
 
Thanks for your suggestion ! I appreciate the time you spent directing me to jegs.....Jack

tdangle 05-03-2017 01:25 PM

Re: 350 Stock Exhaust Upgrade Suggestions ?
 
Guess I got off cheap. I had a dual exhaust put on my 70 2 1/2" for $225 including mufflers and tail pipes. Might check around at a few places.

72bowtiestepper 05-03-2017 01:29 PM

Re: 350 Stock Exhaust Upgrade Suggestions ?
 
Quote:

Originally Posted by tdangle (Post 7933110)
Guess I got off cheap. I had a dual exhaust put on my 70 2 1/2" for $225 including mufflers and tail pipes. Might check around at a few places.


I agree....$800 seems VERY high ! Does that include buying the rams horn manifolds as well as the rest of the exhaust system ??

cleszkie 05-03-2017 01:44 PM

Re: 350 Stock Exhaust Upgrade Suggestions ?
 
The cost will also depend on tubing used (galvanized vs stainless), how it is bent (mandrel - smooth bends vs standard exhaust tubing bender - crimped bends), if a cross-over is installed, if removable clamps/joints are installed to make the system removable vs fully welded, and quality of mufflers.


All times are GMT -4. The time now is 12:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com