The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Installed my birthday present. (https://67-72chevytrucks.com/vboard/showthread.php?t=737084)

custom10nut 05-03-2017 07:15 PM
Installed my birthday present.
 
1 Attachment(s)
Put on my new center caps, that my son got me for my birthday.
The old one is in front.
Whadyall think?:metal:

Haru 05-03-2017 07:17 PM
Re: Installed my birthday present.
 
Looks great

flashed 05-03-2017 07:44 PM
Re: Installed my birthday present.
 
Much better .

Boog 05-03-2017 07:50 PM
Re: Installed my birthday present.
 
1 Attachment(s)
Looks better this way. ;)

flashed 05-03-2017 08:00 PM
Re: Installed my birthday present.
 
Now the question I have is where did your son buy those ?

Husker 05-03-2017 10:58 PM
Re: Installed my birthday present.
 
Looks good with smaller cap. Need a pic of whole truck
Ron

El Dorado Jim 05-04-2017 02:19 AM
Re: Installed my birthday present.
 
looks good!!!

weim55 05-04-2017 11:57 AM
Re: Installed my birthday present.
 
Looking for a set of caps and lug nuts for a set slots going on my '67. Could you measure the opening of center hole of your wheels? I haven't been able to find a cap that works. The cap needs to be 3 1/8" OD. This that the same as yours?

Thanks,

Steve weim55 Colorado

custom10nut 05-04-2017 01:53 PM
Re: Installed my birthday present.
 
Quote:
Originally Posted by flashed (Post 7933443)
Now the question I have is where did your son buy those ?
From EBay I think, but the box came from Summit. $32.00 delivered

custom10nut 05-04-2017 01:57 PM
Re: Installed my birthday present.
 
Quote:
Originally Posted by weim55 (Post 7934020)
Looking for a set of caps and lug nuts for a set slots going on my '67. Could you measure the opening of center hole of your wheels? I haven't been able to find a cap that works. The cap needs to be 3 1/8" OD. This that the same as yours?

Thanks,

Steve weim55 Colorado
Mine are 4.25 inch. To confirm before I ordered, I looked up the specs on my wheels. If I remember right there were caps your size offered


All times are GMT -4. The time now is 10:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com