The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OH WTB: 15 inch trim rings for rally wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=741916)

Chevy Fan Always 07-07-2017 07:48 PM

WTB: 15 inch trim rings for rally wheels
 
3 Attachment(s)
I need 4 but I will take at least 1, 15 inch rally wheel trim rings for a 6 inch wheel, They have the half moon oval for the valve stem and 4 friction clips. Project 99.9% complete!

For this truck.

Ironhorse 07-07-2017 09:52 PM

Re: WTB: 15 inch trim rings for rally wheels
 
May be able to help with your search. Will check the stash tomorrow and get back with you. Not sure how many I have, tho.

Chevy Fan Always 07-07-2017 09:55 PM

Re: WTB: 15 inch trim rings for rally wheels
 
That would be great Thanks!

Ironhorse 07-08-2017 10:46 AM

Re: WTB: 15 inch trim rings for rally wheels
 
5 Attachment(s)
Found the trim rings, only have three, not a full set of four. Can't tell in the pic but is the trim ring pictured a smooth curved outer edge or does it have two stepped flat surfaces? Mine are smooth curved with no step, they do have the half moon valve stem opening. All three are nice driver quality with some very minor depressions, no scratches, they do have the four friction tabs on the back. Tried to show the areas but hard to do on stainless or chrome. Pics below of what I have, take one, two or three, your choice, $15 each plus shipping. Money order, do not have Paypal. Let me know if you have an interest, thanks. :chevy:

Chevy Fan Always 07-08-2017 10:01 PM

Re: WTB: 15 inch trim rings for rally wheels
 
I appreciate you looking for me. I am going to pass on those. Mine are the stepped. I will have to keep looking.

Thanks though

Ironhorse 07-09-2017 10:40 AM

Re: WTB: 15 inch trim rings for rally wheels
 
Did not notice right off you had the "stepped" style trim rings. Looking a bit further into the stash/parts shed I did locate a full set of four + one (5 total) of the stepped trim rings with the 4 friction lock catches. I can clean them up a bit, really dusty right now, and get some pics if you are interested in them. Let me know, thanks.

Chevy Fan Always 07-09-2017 11:42 AM

Re: WTB: 15 inch trim rings for rally wheels
 
Quote:

Originally Posted by Ironhorse (Post 7986776)
Did not notice right off you had the "stepped" style trim rings. Looking a bit further into the stash/parts shed I did locate a full set of four + one (5 total) of the stepped trim rings with the 4 friction lock catches. I can clean them up a bit, really dusty right now, and get some pics if you are interested in them. Let me know, thanks.

Yes I would be interested in taking a look, thanks

Ironhorse 07-09-2017 12:15 PM

Re: WTB: 15 inch trim rings for rally wheels
 
5 Attachment(s)
Pics of the 5 stepped trim rings. All VERY nice with only some smaller blemish issues, not show but VERY NICE. Tried to show a shallow area on one trim ring (2nd pic) and minor hair lines on another trim ring pic (3rd pic). Hard to see, all five have half moon valve stem opening and the friction catches. Will only sell as a set of four and the spare ring, 5 total. $100 plus shipping, let me know

Ironhorse 07-09-2017 07:43 PM

Re: WTB: 15 inch trim rings for rally wheels
 
ChavyFanAlways, any interest? Hope did not come across as a bit brusque, could have worded my response a bit better. Inter-net key board is hard to express when typing. The trim rings are really VERY NICE if at all interested. Just prefer to sell as a set of 5 and not break them up. :chevy:

Chevy Fan Always 07-09-2017 10:35 PM

Re: WTB: 15 inch trim rings for rally wheels
 
Quote:

Originally Posted by Ironhorse (Post 7987174)
ChavyFanAlways, any interest? Hope did not come across as a bit brusque, could have worded my response a bit better. Inter-net key board is hard to express when typing. The trim rings are really VERY NICE if at all interested. Just prefer to sell as a set of 5 and not break them up. :chevy:

No your fine, I am mulling it over. Is there any deep dents? I am also trying to figure out the angle where they curve. Looks a little more severe than mine. Can I let you know in the morning. Your price is fair. Just thinking about it.

Chevy Fan Always 07-09-2017 10:45 PM

Re: WTB: 15 inch trim rings for rally wheels
 
Quote:

Originally Posted by Ironhorse (Post 7987174)
ChavyFanAlways, any interest? Hope did not come across as a bit brusque, could have worded my response a bit better. Inter-net key board is hard to express when typing. The trim rings are really VERY NICE if at all interested. Just prefer to sell as a set of 5 and not break them up. :chevy:

No your fine, I am mulling it over. Is there any deep dents? I am also trying to figure out the angle where they curve. Looks a little more severe than mine. Can I let you know in the morning. Your price is fair. Just thinking about it.

Ironhorse 07-09-2017 11:15 PM

Re: WTB: 15 inch trim rings for rally wheels
 
No problem at all thinking it over til morning. I will say there are absolutely NO deep dents or dings in the trim rings. I tried to show the one trim ring that has a VERY shallow depression, not what I would call a dent or ding. The other trim ring I pictured has some very minute hair line marks. On a 1 to 10 scale I would give the set of 5 trim rings a strong 9. I don't think you would be dis-appointed with them at all. The trim rings are NOT show quality perhaps but very close to it. Not sure what to tell you about the "angle" you mentioned, pretty sure most all trim rings for 15'' wheels with the smaller width rim maintain the same angle. May be just the way the pics show that looks to be different. :chevy:

Chevy Fan Always 07-10-2017 06:28 AM

Re: WTB: 15 inch trim rings for rally wheels
 
Would you take a 100.00 shipped?

Ironhorse 07-10-2017 07:38 AM

Re: WTB: 15 inch trim rings for rally wheels
 
Thanks for the interest and the offer but but believe I will pass on the $100 shipped offer. Good luck in your search, :chevy:

Chevy Fan Always 07-10-2017 07:53 AM

Re: WTB: 15 inch trim rings for rally wheels
 
just an offer, how much for the shipping to 44805? I think I have bought from you before.

Ironhorse 07-10-2017 09:01 AM

Re: WTB: 15 inch trim rings for rally wheels
 
Quote:

Originally Posted by Chevy Fan Always (Post 7987442)
just an offer, how much for the shipping to 44805? I think I have bought from you before.

PM sent with shipping info. :chevy:

Ironhorse 07-10-2017 09:10 PM

Re: WTB: 15 inch trim rings for rally wheels
 
5 piece set of trim rings SOLD to Chevy Fan Always and payment pending. PM sent with payment info, thanks for the purchase :chevy:


All times are GMT -4. The time now is 03:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com