1970 Small Block AC Brackets
 

Can anyone post images of ALL brackets used by the factory to mount a stock ac compressor onto a small block engine in a 1970 C10?

Thank you.

Re: 1970 Small Block AC Brackets
 

I don't have access to photos since photobucket blocked third party use of my images, but if I remember correctly there are seven pieces.

Re: 1970 Small Block AC Brackets
 

Here you go.:chevy:

http://67-72chevytrucks.com/gallery/...1/DSC01590.JPG

Re: 1970 Small Block AC Brackets
 

How does the front thick bracket bolt to the motor?

Re: 1970 Small Block AC Brackets
 

Don't know if these will help

Re: 1970 Small Block AC Brackets
 

Yeah i want to see where the bracket attaches down at the water pump area. And that long pivot bracket, how do I adapt it with headers? Some thick spacers?

Re: 1970 Small Block AC Brackets
 

Don't know how you would adapt the stock bracket with headers as one spans and fastens to the exhaust manifold bolts. You can't use the stock brackets on an aftermarket aluminum intake either in my past experience.

Re: 1970 Small Block AC Brackets
 

Wow, maybe I just go with a sanden aftermarket compressor and brackets.

Re: 1970 Small Block AC Brackets
 

That would be easier. I had to when I swapped mine. Classic air has a kit and that's what I bought.:chevy:

Re: 1970 Small Block AC Brackets
 

Do I still run the POV valve and everything else??

Re: 1970 Small Block AC Brackets
 

You can buy as much are less as you want. :chevy:

Re: 1970 Small Block AC Brackets
 

Here are some pictures of the brackets installed.
The alternator is the best out of them. The others are so so.:chevy:

http://67-72chevytrucks.com/gallery/...MG_1665_1_.JPG

http://67-72chevytrucks.com/gallery/data/580/AC_71.JPG

http://67-72chevytrucks.com/gallery/...um/Belts21.jpg