The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Van Tilt column question (https://67-72chevytrucks.com/vboard/showthread.php?t=751677)

chevyguy_72 12-01-2017 10:13 PM

Van Tilt column question
 
4 Attachment(s)
So a long while back i picked up an automatic Van tilt column i was initially going to use for parts for a truck tilt i had that was damaged... but i now have a new project that the van tilt will work in perfectly... anyway... i dug it out knowing i had to move the neutral safety switch and wanted to clean it up and paint it before installing it... But heres the thing... no neutral safety switch at all... positive its a auto column as i had to pull from the van it was in... it was hooked up and working... did some versions not have neutral safety switch?
This column also had the cruise control turn signal lever...
Thoughts?

Livrat 12-01-2017 10:57 PM

Re: Van Tilt column question
 
That is correct, some of the earlier vans (74-76) had the switch mounted directly on the transmission instead of on the column.

chevyguy_72 12-02-2017 11:02 PM

Re: Van Tilt column question
 
Quote:

Originally Posted by Livrat (Post 8094786)
That is correct, some of the earlier vans (74-76) had the switch mounted directly on the transmission instead of on the column.

Good to know...
Thanks


All times are GMT -4. The time now is 04:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com