69-72 mouldings
 

Have several pieces of NOS black lower 69-72 trim for long bed in assorted condition. Most of the packaged pieces are good, the pieces that are out of the packaging all fell off or apart and has a few dings and scratches on the painted areas. Those pieces would make great driver pieces. 40.00 each for those. I have 2 sets of forward fender pieces left and right 35.00 each, 1 right rear fender piece 35.00, 1 door piece 50.00, 4 left cab corners 30.00 each, 1 right cab corner 30.00, several forward lower bed pieces each side and several lower rear bed pieces those in the packages 4 65.00 each. Also have 2 upper shortbed mouldings both for 300.00 and shipping on all pieces. If you want to take it all give me 900.00 and I'll ship.

Re: 69-72 mouldings
 

Is the front bumper for sale, GM or aftermarket .

Re: 69-72 mouldings
 

not for sale

Re: 69-72 mouldings
 

OK, Thanks

Re: 69-72 mouldings
 

How much for a full set of driver quality? Long bed lower only.

Re: 69-72 mouldings
 

Robert;

How about your price for lower black moldings ( long bed and cab fenders doors corners) complete. May not need to ship.

Thanks

LILREDGMC

Re: 69-72 mouldings
 

Sweet, were you asking about a full set of lower black moulding and not just the bed? I think I misunderstood you on your comment. I could almost put a full set together with NOS and driver quality and since you asked before the last person I'll give you first shot. I'll take 500.00 for a mixed batch of lower black mouldings minus one door moulding. I only have one of those.

Re: 69-72 mouldings
 

Lilred, I'll give you the same deal on the lowers as sweet, unless you want mostly NOS, I won't have all the pieces.

Re: 69-72 mouldings
 

Robert:

I believe its proper to let Sweet make his choice since he asked first; I will await his decision.

In the meantime if you could, clear me up, all of the moldings are NOS some in packaging, some out of the packaging with light shop damage (is that a fair assessment). Thanks Robert.

LILREDGMC

Re: 69-72 mouldings
 

Yes sir that's a proper assessment. All of them are still in darn good shape though. Remember the set is minus one door moulding. I'll give sweet till tomorrow to answer and if you want them then post I'll take them pending sweets answer.

Re: 69-72 mouldings
 

Thanks Robert appreciate the responses

LILREDGMC

Re: 69-72 mouldings
 

if you need a better assessment pm me your cell number and I'll shoot you some pictures. I went back out to look and I'm missing one door moulding and the right front fender rear moulding behind front right wheel. 10 out of the 12 pieces I'll let go for 450.00 since 2 are missing.

Re: 69-72 mouldings
 

Yea Robert, that is what I meant. I’m looking for the whole truck. I appreciate your willingness to let me have first choice. I’m going to have to pass this time. Thanks again

Re: 69-72 mouldings
 

No problem.

Re: 69-72 mouldings
 

Lilred, here's your shot....

Re: 69-72 mouldings
 

Bump for lilred...

Re: 69-72 mouldings
 

Robert do you still have the two pieces of upper SWB trim? If so how much to 85225?

Re: 69-72 mouldings
 

stickman I still have those. I will get a quote on shipping. 300.00 for the pair plus shipping. The last time I shipped a long wheel base trim it exceeded the minimum length and was fairly high. But these are like 2 feet shorter. So I'll get a quote on it for you.

Re: 69-72 mouldings
 

stickmsn, fedex quotes are kinda funny. It could be 31.88 or 168.55. Only way I can know for sure is to go over to fedex and give them the approximate measurements then let you know. Ok Stickmsn, I stopped by fedex and gave them the dimensions and approximate weight and they're quoting about 31.00 dollars maybe 32.00. So I can get these packed up in a PVC pipe and wrapped in bubble wrap if you want them.

Re: 69-72 mouldings
 

Bump for stickman

Re: 69-72 mouldings
 

Robert

Sorry for my delay, its called work and available time. Sent PM for phone and email. Still interested in lower black moldings. Give me a call when you get a minute, I'm tied to the desk working on a project report.

THanks

LILREDGMC

Re: 69-72 mouldings
 

Robert:

As we discussed yesterday, drop me a PM with address, I'll send you payment and then you can crate it and ship it.

Thanks Robert

LILREDGMC

Re: 69-72 mouldings
 

Sent you a text Larry!

Re: 69-72 mouldings
 

This is a longshot, and waaaay late, but do you have any of the longbed upper mouldings left? I'm in need of passenger side piece and the clips or hardware to put it on.

Re: 69-72 mouldings
 

**nevermind** I read that wrong. I see your upper pieces are for a shortbed. As a side not - I'm just up the road from you in Owasso. :)