The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 6L80E mounted but need driveshaft made (https://67-72chevytrucks.com/vboard/showthread.php?t=767742)

scoobiedoo01

07-18-2018 02:43 PM

6L80E mounted but need driveshaft made

Hello all. I have a 67 C10 2 wheel drive that I've installed a L92 from a 2010 Escalade and 2011 6L80E from a 2 wheel drive Escalade. I need to find the correct slip yoke to go with this set up so i can measure to have my driveshaft made. Has anyone got a part number for the right slip yoke? Thanks in advance

'70_402

07-18-2018 04:06 PM

Re: 6L80E mounted but need driveshaft made

I would just talk to your local driveshaft shop.. they will have one for sure.

71meangreenc10

07-19-2018 12:10 AM

Re: 6L80E mounted but need driveshaft made

Is it a male or female yoke on the trans?

Smitty

4carbcorvair

07-19-2018 07:02 AM

Re: 6L80E mounted but need driveshaft made

Quote:

Originally Posted by '70_402 (Post 8303804)

I would just talk to your local driveshaft shop.. they will have one for sure.

Yup, local driveline shop should be able to look it up and fabricate a driveshaft for you. Place I go to is excellent.

scoobiedoo01

07-19-2018 10:24 AM

Re: 6L80E mounted but need driveshaft made

Quote:

Originally Posted by 71meangreenc10 (Post 8304105)

Is it a male or female yoke on the trans?

Smitty

It's female.

71meangreenc10

07-19-2018 01:06 PM

Re: 6L80E mounted but need driveshaft made

If you can post a pic of the trans output, I may have the answer you need.

Smitty

All times are GMT -4. The time now is 10:37 PM.