Needing a couple parts
 

I am looking for a radiator for a 65 c10 with a 292 in it. The original Harrison in it is leaking pretty good and I’m just looking to put one in and sel the pickup.

Also looking for a carb for my 64 K10 I recently acquired. It’s a 64 but it has a 292 fromm73-84 in it if that’s the right years. Didn’t have a carb on it but the manifold was covered well. Needing a carb for it. If it needs rebuilt that’s fine, just as long as it’s all complete. Let me know what you’ve got. Thanks

Re: Needing a couple parts
 

If you are just wanting to flip it, buy an aluminum rad from ebay. I got one for about $130 to my door. Original in good shape are very hard to find.

I have a couple Rochester "b" one barrels, is that what you are looking for as far as a carb?

Re: Needing a couple parts
 

I have a radiator from my 64. It ran with a 292.
50 plus ship

Re: Needing a couple parts
 

Jdl71- I’m not real sure the number or differences in carbs. Do you have any pictures of it? Might be able to tell..

Born Lucky- what would shipping be to 67601?

Thanks

Re: Needing a couple parts
 

It's a one barrel but from mid 60's. I just reread your post and saw your engine was newer. I'm not sure that would work.

Re: Needing a couple parts
 

It may work, I bought a 65 which needs the radiator and it’s got a 292 with a carb from a 235 on it.

Re: Needing a couple parts
 

I dug through my stash and don't think I have anything you can use after all. I've robbed too many parts off the carbs I have left. Sorry about that.

Re: Needing a couple parts
 

I think, I have an original you can have for free
you have to pay for shipping from Joplin mo
its out of a 1962 short fleet
if you haven't already got one
Michael
I have family in Wichita I could probably drop it off there