![]() |
Anyone have their windshield out? Need to verify a dimension
1 Attachment(s)
Getting ready to weld in the windshield area.
I need to verify the width of the opening all the way across the very top of the WS frame at the corners. I want to make sure it matches the jig that I made for the spacing I had to remove it to put in the inner A pillars Attachment 2158437 |
Re: Anyone have their windshield out? Need to verify a dimension
1 Attachment(s)
Straight across inside corner to inside corner is 56 1/2" . :chevy:
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
I have another 67 cab burried in the corner of the garage , and 2 more outside covered in tarps , I'll move some stuff out of the way and get some more measurements . :chevy:
|
Re: Anyone have their windshield out? Need to verify a dimension
Sounds like Grumpy has you covered. I'm having the windshield on my Burban pulled and resealed here in another 30 minutes. Would have been perfect timing.
|
Re: Anyone have their windshield out? Need to verify a dimension
I'm going to confirm Grumpy's 56 1/2 measurement. That is what mine is.
|
Re: Anyone have their windshield out? Need to verify a dimension
this forum is better than four years of college
thanks to all….. I’ll post the results soon much appreciated |
Re: Anyone have their windshield out? Need to verify a dimension
I'll post my dimensions shortly. Gotta have dinner with the wife first 😉
|
Re: Anyone have their windshield out? Need to verify a dimension
Same. 56 1/2".
|
Re: Anyone have their windshield out? Need to verify a dimension
Just to check with you guys but is that the straight line dimension or is that following the windshield curve?
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
I’ll make a new gauge to go across and clamp everything in place I don’t want any surprises when I go to install the windshield |
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
Just to be Crystal clear, I assume you are measuring from the end of the black arrow and not the end of the red arrow?
https://67-72chevytrucks.com/vboard/...ictureid=26695 Thanks! |
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
One last question. What is the distance between the drivers and passengers sides where the red arrow is?
https://67-72chevytrucks.com/vboard/...ictureid=26697 |
Re: Anyone have their windshield out? Need to verify a dimension
I get 57 1/4
Kind of hard to measure with one person. Tape measure basically rests on the top of the dash to measure. |
Re: Anyone have their windshield out? Need to verify a dimension
Awesome!! Thank you so much!!
|
Re: Anyone have their windshield out? Need to verify a dimension
How about top to bottom in the center of the frame opening?
Thanks |
Re: Anyone have their windshield out? Need to verify a dimension
Come on guys I really need this measurement,,,,,,, please.....
|
Re: Anyone have their windshield out? Need to verify a dimension
Quote:
|
Re: Anyone have their windshield out? Need to verify a dimension
1 Attachment(s)
I made braces for that area because I'm replacing the windshield header on this cab.
It's not the best picture, but I did go out to the shed to verify...21" Attachment 2363615 |
All times are GMT -4. The time now is 07:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com