Screw for Turn Signal Lever
 

I lost the little screw that holds the selector lever on the T/S Switch cam inside the steering column.
I'm tired of making Hand Signals.
What size is that screw?
:chevy:

Re: Screw for Turn Signal Lever
 

Well
I took the one out of a column I purchased here on the Board.

I found a tap and a nut that that tap goes in,
Just to double check it because over the years all kinds of stuff could happen.;)

If this screw is original (It appears to be),

It is a Pan head #8-32 and is 0.710" long and is self-starting.

Hope this helps.