Will a disk brake/cross member from 82 half ton bolt up?
 

Will this setup bolt up?
67
Ben

------------------
67 Fleetside Custom C-10
SBC 350 .030 9:1 comp.
Comp Cams Extreme Energy XE256H-10
Edlebrock performer intake
Screw in rocker studs
Oversize valves
Scat 350 crank
Everything balanced within one gram.
Marine grade plywood bed(looks awsome)

I just installed a 1980 front end into my 70cst. This gives me 5 lug disc brakes, a variable quick steering box, plus it's easier to do PM...I have been told up to 1987 will bolt in. After 1980 GM went metric. You may have to open a couple holes but for my 1970 C10 it was a direct swap. Hopes this helps. It would be good to get other feedback. I know just enough to be dangerous.
Regards,
Dewayne70cst

i put a x member off a 76 on my 68, had to make a couple holes bigger, parts are alot cheaper for the newer front ends.

------------------
68 swb fleet soon to be bagged and big block powered
68 lwb fleet in primer
35 chevy truck
97 dodge on 35 boggers
3 out of 4 aint bad!
Jefferson city, MO