The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Als454 · 04-08-2002, 10:08 PM

Had similar problem with my brothers truck. Found out the bearing cups on the rear u-joint were not fully seated against the universal joint. Found it by grabing the drive shaft in the rear was able to feel slight side to side movement.

------------------
72 Chevy A/C P/B P/S Tilt
454 Engine 400 TCI Trans
3" Exhaust W/Headers
C30 Frame C10 Suspension
Short Wheel Base (Dually)

04-08-2002, 10:08 PM	#4
Als454 Senior Member Join Date: Jan 2002 Location: Vienna, Ohio, USA Posts: 259	Had similar problem with my brothers truck. Found out the bearing cups on the rear u-joint were not fully seated against the universal joint. Found it by grabing the drive shaft in the rear was able to feel slight side to side movement. ------------------ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans 3" Exhaust W/Headers C30 Frame C10 Suspension Short Wheel Base (Dually) __________________ 72 Chevy A/C P/B P/S Tilt 454 Engine 400 TCI Trans C30 Frame C10 Suspension Short Wheel Base (Dually)