The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 11-26-2004, 11:14 PM

if you are talking power brakes, i think the one under the master cylinder is the only adjustment. You don't need to disconnect the lines, just the two 9/16 nuts and pull the master cylinder away. The lines will give you enough room.

11-26-2004, 11:14 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	if you are talking power brakes, i think the one under the master cylinder is the only adjustment. You don't need to disconnect the lines, just the two 9/16 nuts and pull the master cylinder away. The lines will give you enough room.