The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - I need a measurment from a trailing arm truck.

SW69 · 11-28-2004, 07:28 PM

Very stiff tape measure.

Both measurements were from the outsides of the u-bolts on the bottom side. I didn't measure from the nut, but the outsides of the u-bolts as they stick out through the nut.

Good luck.

11-28-2004, 07:28 PM	#15
SW69 Registered User Join Date: Oct 2004 Location: Portland, OR Posts: 9	Very stiff tape measure. Both measurements were from the outsides of the u-bolts on the bottom side. I didn't measure from the nut, but the outsides of the u-bolts as they stick out through the nut. Good luck.